Bosch 3.5 User Manual

Page of 498
Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 11 | Optional Software
en | 480
61
PC Telephone Interface 
Client
61.1 Introduction
The Praesideo PC Telephone Interface Client allows users 
to call in to a Praesideo system using a telephone. The 
telephone keypad is used for caller identification, 
predefined call selection and zone and/or zone group 
selection. The predefined call contains information 
about priority, start and end tones, prerecorded 
messages and initially selected zones. The user can then 
add other zones via the telephone keypad. The call may 
also include live speech, which will be recorded when 
spoken into the telephone.
The PC Telephone Interface Client is a software client of 
the Praesideo PC Call Server. It is installed on the same 
PC as the PC Call Server and is also configured as part of 
the PC Call Server configuration.
The PC Telephone Interface Client handles incoming 
telephone calls from VoIP telephones (softphones or 
hardphones), but also from POTS telephones (either 
local or remote telephones) via an additional voice 
gateway, such as the Linksys SPA3102. The PC running 
the PC Telephone Interface Client sends the live speech 
part of a call to the Praesideo system via an analog 
audio link from the PC soundcard.
VoIP telephones can also call in to the PC Telephone 
Interface Client via a WAN or via the Internet.
61.2 Requirements
The PC Telephone Interface Client can run on any PC that 
meets the following minimum requirements:
Operating system:
Microsoft® Windows XP with Service Pack 1 or
Microsoft® Windows Vista or
Microsoft® Windows 7
Network connection: 100 base-T
1 GB RAM
61.3 Installation
Proceed as follows:
1 Start the PRS-SW Praesideo Software DVD (see 
2 Click Optional > PC telephone interface 
(see chapter section 38). A File Download window 
appears.
3 Proceed in the same way as for the PC Call Server 
Configuration Client (see section 59.3).
61.4 Licensing
In order to use the PC Telephone Interface Client, a license 
must be obtained. By purchasing the PRS-TIC, one gets 
a registration code that must be registered for the system 
it is intended for. Registration is done via the Bosch 
registration website, where the application is coupled to 
PC Call Server and its dongle. See section 59.5.4.15.
61.5 Start
Similar to the PC Call Server, the PC automatically starts 
the PC Telephone Interface Client as a service when 
Windows is started. Important events will be logged to 
the Windows event log:
Startup and shutdown of the service
Error messages about license validity
Abnormal (fatal) errors that cause the service to shut 
down
Note
To avoid call interruptions, do not run other 
processor-demanding applications on the PC of 
the PC Telephone Interface Client