Dimplex LBN20 Leaflet

 

 

 

 

 

 

        Incorporating 

2Kw 

fan 

heater 

 

 

 

 

 

 

 

    

 

                                                                     

Issue 2    4/2/05        

 
 
 

521

127

67

173

540

620

Screws for

removing

grate

 

 
 
 

 
 
 
 

 
 
 
 
 
 
 
 
 

 Fig. 

1 

 
 
 
 
 
 
 
 

 

 
IMPORTANT 
THESE INSTRUCTIONS SHOULD BE READ 
CAREFULLY AND RETAINED FOR FUTURE 
REFERENCE. 
 

 

Unpack the heater carefully and retain the packaging 
for possible future use, in the event of moving or 
returning the fire to your supplier. Loose coals are 
packed separately within the carton. When the heater 
is assembled the coals are placed on top off the fuel 
bed. 
 
The heaters is designed for use inset into a 407mm 
(16”) or 457mm (18”) wide by 559mm (22”) high 
fireplace opening  see also section “Installation in a fire 
place opening”. 
 
A 2kw fan heater discreetly positioned in the canopy of 
the fire provides heating in cold weather. Switching 
allows half or full heat. 
 
A minimum distance of 1 metre (39”) must be 
maintained between the front of the heater and any 
surrounding furniture, overhanging curtains or other 
obstructions. 
Before connecting the heater check that the supply 
voltage is the same as that stated on the heater. 
 

 

Warning: This appliance must be earthed 
This heater must be used on an 

∼ (AC) supply  

only and the voltage marked on the heater must  
correspond with the supply voltage.  
For your convenience, the heater is fitted with a   
rewireable plug incorporating a 13 amp fuse.  
In the event of replacing the fuse in the plug  
supplied, a 13 amp fuse approved by ASTA to BS  
1362 must be used. 

 
 
 

 

• 

• 

• 
• 

 

When using electrical appliances, basic precautions should 

always be followed to reduce the risk of fire, electric shock, 

and injury to persons, including the following: 
• 

If the appliance is damaged, check immediately with the 

supplier before installation and operation. 

• 

DO NOT use outdoors. 

• 

DO NOT use in the immediate surroundings of a bath 

shower or swimming pool. 

• 

DO NOT locate the heater immediately below a fixed 

socket outlet or connection box. 

• 

DO NOT COVER THE HEATER. Do not place material 

or garments on the heater, or obstruct the air circulation 

around the heater, for instance by curtains or furniture, 

as this could cause overheating and a fire risk. 

DO NOT leave young children, the elderly, or the infirm 

unsupervised in the vicinity of the heater. 

DO NOT use this heater in series with thermal control, a 

programmable controller, a timer or any other device 

that switches the heater automatically, since a fire risk 

exists when the heater is accidentally covered or 

displaced. Ensure that furniture, curtains or other 

combustible material are positioned NO closer than 

1meter from the heater. 

In the event of a fault unplug the heater. 

Unplug the heater when not required for long periods. 

• 

Keep supply cord away from the front of the heater. 

• 

Although this heater complies with safety standards, we 

do not recommend its use on deep pile carpets or on 

long hair type of rugs. 

• 

The appliance must be positioned so that the plug is 

accessible. 

• 

If the supply cord is damaged it must be replaced by the 

manufacturer or service agent or a similarly qualified 

person in order to avoid a hazard.