Kingston Technology 512MB 667MHz DDR2 Non-ECC CL5 SODIMM KVR667D2S5/512 Data Sheet
Product codes
KVR667D2S5/512
Memory Module Specification
DESCRIPTION:
This document describes ValueRAM's 64M x 64-bit (512MB) CL5 DDR2-667 SDRAM
(Synchronous DRAM) memory module. The components on this module include eight
64M x 8-bit (16M x 8-bit x 4 Bank) DDR2-667 SDRAM in FBGA packages. This 200-pin
SODIMM uses gold contact fingers and requires +1.8V. The electrical and mechanical
specifications are as follows:
(Synchronous DRAM) memory module. The components on this module include eight
64M x 8-bit (16M x 8-bit x 4 Bank) DDR2-667 SDRAM in FBGA packages. This 200-pin
SODIMM uses gold contact fingers and requires +1.8V. The electrical and mechanical
specifications are as follows:
FEATURES:
Clock Cycle Time (tCK) CL=5
3ns (min.) / 8ns (max.)
Row Cycle Time (t
RC
)
54ns (min.)
Refresh to Active/Refresh Command Time (tRFC)
105ns
Row Active Time (tRAS)
39ns (min.) / 70,000ns (max.)
Single Power Supply of
+1.8V (+/- .1V)
Power
1.595 W (operating)
UL Rating
94 V - 0
Document No. VALUERAM0462-001.A00
09/21/05
Figure 1: KVR667D2S5/512 200-Pin SODIMM
KVR667D2S5/512
512MB 64M x 64-Bit DDR2-667
CL5 200-Pin SODIMM
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 30mm.
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 30mm.
(units = millimeters)