Napco Security Technologies GEM-RP3DGTL User Manual

T U R N I N G O F F T H E A L A R M ( D I S A R M I N G ) W H E N R E T U R N I N G

1. Upon entry, the red ARMED light will be on and the keypad sounder will come on as a reminder to disarm the panel.

During the final 10 seconds, the sounder will pulse a warning signal.

2. Immediately enter your code, then press the

button. The sounder will silence and the red ARMED light will go out.

Note: If you enter an invalid code, the keypad will beep 4 times, signifying an error. Re-enter your code immediately.

Alarm Indication

If the red ARMED light is flashing upon entry, an alarm occurred while you were out. (The display will scroll the

number(s) of the violated zone(s).) Proceed with caution! If you suspect that an intruder may still be on the premises, leave
immediately and call authorities from a neighbor's phone.

To silence an audible alarm,

1. Enter your code and press the

button. After the system is disarmed, the window will continue to display the

number(s) of the zone(s) violated.

2. To reset the display, note the zones violated, then press the

button.

GEM-RP3DGTL.pub
page 10

Wednesday, August 18, 1999 14:03