Napco Security Technologies GEM-RP3DGTL User Manual
21
Your alarm specialist may have
programmed your system to be moni-
tored by a central station. The built-in
digital communicator can transmit
emergency signals and status reports
to the central station 24 hours a day.
tored by a central station. The built-in
digital communicator can transmit
emergency signals and status reports
to the central station 24 hours a day.
Communicator Features
Abort Delay. Ask your installer
which of your zones have abort delay,
a delay that enables you to reset the
system before it communicates to the
central station.
a delay that enables you to reset the
system before it communicates to the
central station.
•
Regular Burglary (Non-24-Hour)
Zone reports are aborted by dis-
arming within the delay period.
arming within the delay period.
•
24-Hour Zones and zones pro-
grammed to report restores must
be restored first, then the panel
armed and disarmed, all within
the delay period.
be restored first, then the panel
armed and disarmed, all within
the delay period.
Opening and/or Closing Report-
ing. Your system can notify the central
station every time it is disarmed or
station every time it is disarmed or
armed. Any or all of up to 96 differ-
ent users can each be identified. If
your system reports on arming
(Closing Report), the central station
will acknowledge arming. This will
ent users can each be identified. If
your system reports on arming
(Closing Report), the central station
will acknowledge arming. This will
signal at the keypad as a “ringback”
beep.
beep.
Note: If the ringback signal is
not heard, call for service.
C E N T R A L S T A T I O N M O N I T O R I N G
GEM-RP3DGTL.pub
page 21
page 21
Wednesday, August 18, 1999 14:03