Hearth & Home Technologies GFK21B User Manual
Hearth & Home Technologies • GFK21B Fan Kit • 4016-096 Rev I • 11/08
2
• If the fan is being installed in a B-vent appliance, the fan
shield supplied with the appliance will also need to be
attached. See Figure 3.
attached. See Figure 3.
1. Install the Fan Bracket & Shield
• Place the fan bracket around the fan. See Figure 1.
• Use pliers to crimp the bracket tabs around the fan
housing. See Figure 2.
• If no fan shield is needed, install screws to hold the front
of the fan bracket in place. See Figure 4.
Figure 2
Crimp Bracket Tabs
Figure 3
Fan Shield
Figure 6
Magnets
Figure 1
Fan Bracket-No screws
Figure 4
Fan Bracket
Figure 5
Foam Tape
• Attach the foam tape (Figure 5) and magnets (Figure 6)
to the fan. Cut one magnet strip in half and save the
remaining strip for control module.
remaining strip for control module.