Paradox Hellas S.A. DGP2-648BL User Manual

Figure 8: Modifying illumination settings on the DGP2-648BL

To reset the time and date:

1. Enter your [

] and press the

 

 

button or the [

] key.

2. Press the [8] button. 
3. To change the time, place the cursor under the number you want to change by using 

the [

S] button and enter the time according to a 24-hour clock (i.e. 9 a.m. is 09:00 and 

9 p.m. is 21:00). 

4. To change the date, place the cursor under the number you want to change and enter 

the correct date according to year/month/day. On the DGP2-640 keypad, you will have 
to press the [

] key to not change an element of the date. 

5. Press the [

] button to save and exit.

On the DGP2-648BL keypad, follow this procedure:

1. Enter your [

] and press the

 

 

button or the [

] key.

2. Press the [8] button. 
3. Enter the hour and minutes according to the 24-hour clock (i.e. 9AM is 09:00 and 9PM 

is 21:00).

4. Enter the correct date according to yyyy/mm/dd.
5. Press [

].

You can program the keypad to emit a rapid, intermittent beep tone whenever designated 
zones are opened or only when opened between certain hours. These zones are referred 
to as Chime Zones. Your installer can also program your Chime zones to beep upon 
closure. 

How do I program chime zones?

1. Enter your [

].

2. Press the [9] key.
3. Press the [1] key to chime a zone. Enter the number corresponding to the zone to be 

chimed, or use the [

S] and [T] buttons to scroll the list of zones. Press the [

] 

button to chime or unchime the zone that appears on the screen. Press [

] to 

save.
OR
Press the [2] button to set the time period a chimed zone will beep. Enter the time that 
the chimed zone(s) will start beeping when opened (HH:MM). Enter the time that the 
chimed zone(s) will stop beeping when opened (HH:MM).

4. Press [

] to exit chime programming.

Your system can be programmed to send an alarm to your monitoring station to request 
help from the police, a medical facility, the fire department, or anyone you wish when you 
press a predetermined combination of buttons. To generate a panic alarm, simultaneously 

1. Enter your [

]. Your keypad will emit 

a Confirmation Beep. The 

action light will 

flash. 

2. Press the [6] key. Your keypad will emit a 

Confirmation Beep, the Prg action light will 
illuminate and the numerical light for the current 
setting will illuminate. 

3. Use the 

U

 and 

V

keys to increase or 

decrease the illumination. The range is between 
numerical light 1 to 8 (1 being the lowest and 8, 
the brightest).

4. Press the [

] key to save and exit.