Petsafe PPA11-10711 User Manual

2

2A Remove door from hinges. 

2B Place on a raised level surface such as 

saw horses.

Helpful Tip: Clamp or weigh down the door to 

prevent it from moving.

  NOTE: 

The pet door can be installed with the 

door hanging based on your skill level. 

2C Match the marked lines on the door with the 

shoulder and center lines on the template. Tape 

the template in place. 

3

   

3A Leave template on and drill ⅜” (10 mm) holes 

in the inside corners of template. These will be 

the pilot holes for the saw blade. 
Helpful Tip: Use both hands to hold drill steady and 

straight at a 90° angle.
3B Beginning in one of the holes you just drilled, 

cut along the template lines. After cutting out the 

opening, remove excess template. You may need 

to recut to square the opening. This is necessary 

for the pet door frame to fi t correctly.

Helpful Tip: Use a proper saw blade according 

to door material (for example a wood blade for 

wood door and metal blade for a metal door). 

When cutting use both hands to hold the saw 

slow, steady and straight at a 90° angle. This will 

prevent the blade from cutting unevenly between 

interior and exterior areas of door.