Insignia NS-F12R6-22 Leaflet

Adjustment 
knob

V3 ENGLISH 14-1430

The power switch is incorporated in the speed control switch on the 
top of the fan.
0 - The fan is switched off.
1 - The fan operates at a low speed.
2 - The fan operates at a medium speed.
3 - The fan operates at a high speed.

Oscillation
To allow the fan to oscillate, push the knob down next to the fan speed 
control. Pull up on the knob if you don’t want it to oscillate.

Angle adjustment
1  Loosen the adjustment knob.
2  Adjust the fan to the angle you want, then retighten the knob to 

secure the fan at that angle.

Warning: Risk of fire. Replace the fuse only with a 5A, 125 Volt fuse. Do 
not force the fuse into place.
1  Unplug the fan.
2  Slide open the fuse access cover 

on top of the AC power plug.

3  Remove the fuse.
4  Replace the fuse, then slide the fuse access cover closed.
Caution: Do not replace the AC power plug. Discard the product if the 
plug is damaged. 

•  Unplug the fan.
•  Clean plastic parts with mild soap and a damp cloth or sponge. 

Thoroughly remove soap film with clear water.

•  Do not splash water or other liquid into the motor.

Visit www.insigniaproducts.com for details.

For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
W7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China