Holmes HAWF3195R Leaflet

For example, if you have set your thermostat to 75

degree and the room temperature drops to 74 degrees or

lower then the fan will automatically turn off. The fan will

then turn on again when the room temperature exceeds

75 degrees. 

1.  Press the Mode button to scroll to the desired auto

speed setting (A3, A2, or A1).

2.  Choose the desired temperature setting by pressing

the Temp Up (+) or Temp Down (-) buttons. You may

select a temperature between 60 and 80 degrees

Fahrenheit. Once the desired temperature is set, the

digital display will return to show the ambient room

temperature. View the set temperature by pressing

either the Temp Up (+) or Temp Down (-) buttons.

IMPORTANT: If the fan does not start in the Auto

mode, please be sure that the set temperature is below

the current room temperature. Lower the set temperature

if you would like for the fan to start or switch over to the

manual speed modes. 

1. Hold both the Temp Up (+) and Temp Down (-)

buttons down until the digital display flashes “00”. 

2. Press the (+) or (-) buttons to change time in 1 hour

increments. Note selection ranges from 1 to 16

hours. When in the timer mode, the time remaining

will be displayed. 

NOTE: 
• The Timer Light will glow indicating the timer function

is active.

• If Timer is set when fan is ON, the time displayed will

turn the fan OFF once elapsed. If Timer is set when

fan is OFF, the time displayed will turn the fan ON.

(The default ON speed setting is Manual Low) 

• Timer function can be turned off by pressing the

MODE key at any time. 

Follow these instructions to correctly and safely care for

your fan. Please remember: 
• Always unplug the fan before cleaning. 

• Do not allow water to drip on or enter into fan

housing.

• Be sure to use a soft cloth moistened with a mild

soap solution.

• Do not use gasoline, thinner or benzene as a cleaner.

Clean the fan grills, extender screen, and extender panels

with a soft, damp cloth. Please use caution around the

motor housing area. Do not allow the motor or other

electrical components to be exposed to water. Also, using

a soft bristle brush attachment, a vacuum cleaner may be

used to extract dust buildup on the grill areas. Note to

turn the fan off before cleaning. 

When storing your fan in the off season, it is important to

keep it in a safe dry location. It is important to protect

the fan head from dust. We strongly recommend using

the original box from purchase. 

it is flush on both the top and bottom of the Window

Fan.

5.  To keep the fan in place, carefully close the window

so that the bottom edge of the window rests on the

flat area on the top of the fan.

1.  Set the Fan Vertically in your window opening with

the left side of the fan situated on the bottom and

the Built-In-Extender panel on top. 

2. Set the fan into your window opening (note that in

most cases the window screen does not have to be

removed or left open). 

3.  If the fan does not fit snugly to the top and bottom

of the window casing, attach the Slider Safe

®

Extender Panel and adjust the  built-in extender

screen until the fan fits securely in your window.

WARNING: BE SURE FAN IS SECURELY INSTALLED IN

YOUR WINDOW AT ALL TIMES. DO NOT LEAN OR PUSH ON

THE FAN WHILE IT IS IN THE WINDOW. 

Your remote control requires (2) AAA batteries for

operation. To install the batteries, simply depress the back

of the remote with your thumb on the indentations.

Insert batteries according to the diagram shown inside

and replace cover.
• Do not mix old and new batteries. 

• Do not mix alkaline, standard (carbon-zine), or

rechargeable (nickel-cadmium) batteries. 

The remote controls the Mode, Speed, Temperature, and

Timer settings.

1.  Plug cord into any standard 120 volt AC outlet. 

2.  To turn the fan on and control the speed, press the

mode button. Note that pressing the mode button will

allow you to cycle through the speed setting (High =

3, Med = 2, Low = 1) as well as the Automatic

Thermostat Temperature settings (Auto High = A3,

Auto Medium = A2, Auto Low = A1). 0 indicates the

Off position.

3.  Set the airflow direction by sliding the fan directional

switches located above each fan blade. Note that the

fan blades work independently from one another and

can be used for air intake (bring fresh air in from

outside), exhaust (push air out from within the room)

or exchange (cycles air in and out of the room

simultaneously).

Your fan is equipped with the AccuTemp Plus

TM

Digital

Thermostat that will automatically turn the fan ON and

OFF depending upon the preset comfort temperature. This

is ideal for nighttime operation when temperatures can

drop below comfort levels. 

When using electrical appliances, basic safety precautions

should always be taken including the following:
1. Read all instructions before using this appliance.

2. Use fan only for purposes described in the instruction 

manual.

3. To protect against electrical shock do not immerse

unit, plug or cord in water or spray with liquids. Plug 

the appliance directly into a 120V AC electrical outlet.

4. Close supervision is necessary when any appliance is

used by or near children.

5. Unplug from outlet when not in use, when moving

fan from one location to another, before putting on

or taking off parts and before cleaning.

6. Avoid contact with moving parts.

7. Do not operate in the presence of explosive and/or

flammable fumes.

8. To avoid fire hazard, NEVER place the cord under

rugs or any parts near an open flame, cooking or

other heating appliance.

9. Do not operate any appliance with a damaged cord

or plug after the appliance malfunctions, or has been

dropped/damaged in any manner.

10. The use of attachments not recommended or sold by

the appliance manufacturer may cause hazards.

11. Do not use outdoors.

12. Do not let the cord hang over the edge of a table,

counter or come in contact with hot surfaces or leave

exposed to high traffic areas.

13. To disconnect, grip plug and pull from wall outlet.

Never yank on cord.

14. Always use on a dry, level surface.

15. Do not operate fan until fully assembled with all

parts properly in place.

16. This product is intended for household use ONLY and

not for commercial or industrial applications.

NOTE: MAKE SURE YOU REMOVE ALL CONTENTS OF THE

PACKAGE. PLEASE CHECK PACKAGING MATERIALS FOR

PARTS THAT COULD BE REQUIRED TO ASSEMBLE YOUR

FAN. 
This window fan has been designed to fit double-hung

windows with minimum openings of 24 inches (60 cm)

wide and 12 inches (30 cm) high.
NOTE: This fan is designed and recommended for use

with a screen in the window. 

1.  Align the Window Fan horizontally in the window

with the controls facing you and the Built-In Extender

Panel to the right. 

2.  Set the fan into your window opening (note that in

most cases the window screen does not have to be

removed or left open). 

3.  If the fan does not fit snugly to the left and right of

the window casing, pull out the Built-In Extender

Panel until the fan sits safely in your window. 

4.  If the fan still does not fit snugly attach the Slider

Safe

®

Extender Panel located in the polyfoam

packaging in the original box. Align the slot in the

Slider Safe

®

Extender Panel along the tab located on

the left side of your Window Fan. Slide the Slider

Safe

®

Extender Panel completely down the tab until

A. Front Grill

B. Left Fan Directional Switch 

C. Control Panel

D. Mode Button

E. LED Display 

F. Temp Up (+)

G. Temp Down (-)

H. Right Fan Directional Switch

I. Extender Locks 

J. Extender Panel (not shown) 

K. Built-In Extender Panel 

L. Remote Control (not shown)

A

B

C

D

E

F

G

H

I

K

Figure 1

If you have any questions regarding your product or

would like to learn more about other Holmes

®

products, please contact our Consumer Service

Department at 1-800-546-5637 or visit our website at

www.holmesproducts.com

Window Fan
Extender Panel

To order please go to
www.holmesproducts.com
or call 1-800-546-5637 

HAWF3195R_07EM1.qxd  10/15/07  2:49 PM  Page 2