John Lewis 85573602 Leaflet

Operation

Pedestal fan

Thank you for purchasing this pedestal fan. Please read the instructions and warnings

carefully before using to ensure safe and satisfactory operation of this product.

Please retain this information for future reference.

Appliance components

1. Pedestal

2. Motor head

3. Fan blades

4. Carry handle

5. Speed controller

6. Oscillation button

7. Angle setting

8. Adjustment knob

9. Securing screw

10. Neck

The fan needs to be self-assembled, please refer to assembly section.

The fan comes with three different speeds.

Swithc the fan on by turning the speed controller (5) back to 1, 2, 3.

To switch the fan off, turn speed controller (5) back to 0 (B1).

The fan comes with an additional oscillation function. Turn the oscillation function

on by pushing the oscillation button (6) down (B2).

Turn the oscillation function off by pulling the oscillation button (6) up (B2).

To change the angle of the fan, loosen the angle adjuster (7), then tilt the protective

screen up or down and finally retighten the angle adjuster (7) (B3).

The fan height can be adjusted by loosening the adjustment knob (8), Please hold the

neck (10) while doing so.

Assembly

1.Fix the lower stand pole

on to the base by use of

the 4 screws provided,

and then pit the upper

stand pole.

Screw

Spring washing

Washer

2.Fix the air volume regulator

on top of the upper stand

pole by the 4 screws provided.