Monte Carlo Fan Company 5RH52 User Manual
Install by twisting clockwise, add 1
screw removed step 23 to light fix-
ture.Tighten the 3 screws securely.
27
Connect plug from fan to switch
house plug.
22
Install by twisting clockwise, add 1
screw removed step 20 to light kit
plate. Tighten the 3 screws securely.
21
Connect white wire from fan to white
wire from light fixture. Then plug
blue wire from fan to black wire from
light fixture.
26
Loosen 2 pre installed screws of light
kit plate and remove 1 screw. Save
removed screw for use later.
Install 3 x 40 watt Candelabra bulbs.
28
23
Attach glass to light fixture.
29
Install rubber washer and hex nut to
glass to secure in place.
30
Check the motor for shipping stabi-
lizers and remove if present. Attach
blades using screws and washers
pre-installed. Tighten screws secure-
ly.
19
Loosen 2 screws and remove 1 screw
from motor plate. Save removed
screw for use later.
20
Un-screw the decorative finial nut
from light fixture. Save for later.
24
Un-screw hex nut and rubber washer
from light fixture. Save for later.
25