Monte Carlo Fan Company 5GL66 Series User Manual

Attach blade brackets to blades using

the blade bracket screws and wash-

ers provided.

Check the motor for plastic shipping stabilizer

tabs, and remove them if they are present.

Attach blade assembly to motor using the

motor screws and washers provided. Tighten

screws securely.

Loosen 2 screws and remove 1 screw

from motor plate. Save removed

screw for use later.

Thread capacitor and 9 pin plug

through switch housing plate.

Install by twisting clockwise, replace

screw removed from motor plate.

Tighten all 3 screws securely.

Connect plug from fan to switch

housing plug.

Remove switch housing screws.

Install switch housing cap using

screws removed. Tighten securely.

Lift Canopy to ceiling aligning the key hole slots

with the screws on the bottom of the Mounting

bracket.  Rotate the canopy Counter Clockwise

to lock in place.  Tighten the screws to secure

the Canopy.  See inset for Keyhole shape

Black capacitor box needs to be

stuck to the switch housing. Not

being attached can cause motor

noise.

Remove twin adhesive tape from the

black capacitor as shown above.

Place and press firmly on the capaci-

tor to stick it to the switch housing.

Be sure it is secure.