Mellerware 35920A User Manual
Safety advice and cautions:
Read these instructions carefully before switching
on the appliance and keep them for future refer-
ence. Failure to follow and observe these instruc-
tions could lead to an accident.
Use or working environment:
Place the appliance on a horizontal, flat, and stable
surface.
CAUTION: To prevent overheating do not cover
the appliance.
Read these instructions carefully before switching
on the appliance and keep them for future refer-
ence. Failure to follow and observe these instruc-
tions could lead to an accident.
Use or working environment:
Place the appliance on a horizontal, flat, and stable
surface.
CAUTION: To prevent overheating do not cover
the appliance.
Electrical safety:
• Do not use the appliance if the cable or plug is
• Do not use the appliance if the cable or plug is
damaged.
• Ensure that the voltage indicated on the rating
label matches the mains voltage before plugging
the appliance in.
the appliance in.
• Connect the appliance to a mains socket with an
earth provision.
• The appliance’s plug must fit into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
use plug adaptors.
• Do not use or store the appliance outdoors.
• If any of the appliance’s casings break, immedi-
• If any of the appliance’s casings break, immedi-
ately disconnect the appliance from the mains to
prevent the likelihood of an electric shock.
prevent the likelihood of an electric shock.
• Do not use the appliance if it has fallen on the
floor or if there are visible signs of damage.
• Do not force the electrical connection wire. Nev-
er use the electric wire to lift up, carry or unplug
the appliance.
the appliance.
• Do not wrap the power cord around the appli-
ance.
• Do not touch the plug with wet hands.
Personal safety:
Do not touch any of the appliance’s moving parts
while it is operating.
Do not touch any of the appliance’s moving parts
while it is operating.
Use and care:
• Fully unroll the appliance’s power cable before
• Fully unroll the appliance’s power cable before
use.
• Do not use the appliance if the on/off switch
does not work.
• Do not move the appliance while in use.
• Do not switch the appliance on if it has tipped
over.
• Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
task.
• This appliance is for household use only, not
professional or industrial use.
• Switch off the appliance and disconnect from
electrical supply before changing accessories or
handling parts that move in use. This appliance
should be stored out of reach of children and/or
disabled persons.
handling parts that move in use. This appliance
should be stored out of reach of children and/or
disabled persons.
• This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for their
safety.
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for their
safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• Do not expose the appliance to extreme tem-
peratures.
• Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer’s liability null and void.
turer’s liability null and void.
Installation:
Assembly:
• Fit the adjustable column (S) into the hole in the
Assembly:
• Fit the adjustable column (S) into the hole in the
base support (B), place the counterweight base
(G) underneath the support base (B) and secure
with the “L” shaped screw (I) inserting the washer
(H) between the base and “L” shaped screw (I)
(Fig.1)
(G) underneath the support base (B) and secure
with the “L” shaped screw (I) inserting the washer
(H) between the base and “L” shaped screw (I)
(Fig.1)
• Fix the motor (A) to the adjustable column (S)
through the support motor (F) and fix in place
with the motor body screw fastening (K) and the
motor body fastening lever (L) making it coincide
with the appropriate holes. Next introduce the
incline adjustment screw (M) into the appropri-
ate hole and tighten it with the inline adjustment
lever (N).
with the motor body screw fastening (K) and the
motor body fastening lever (L) making it coincide
with the appropriate holes. Next introduce the
incline adjustment screw (M) into the appropri-
ate hole and tighten it with the inline adjustment
lever (N).
• Unscrew the 4 screws and remove the washers
35920A_IM.indd 3
2012/06/18 09:56:07 AM