Hunter Fan 42609-01 User Manual

42687-01  •  09/08/09  •  Hunter Fan Company

Housing 

Assembly 

Screw

Upper 

Switch 

Housing

7-1.  To attach the upper switch housing, partially install two #6-32 x 

3/8” housing assembly screws into the switch housing mounting 
plate.

7-2.  Feed the upper plug connector through the center opening of the 

housing. 

7-3.  Align the keyhole slots in the housing with the housing assembly 

screws. 

7-4.  Turn the housing counterclockwise until the housing assembly 

screws are firmly situated in the narrow end of the keyhole slots. 
Install the remaining #6-32 x 3/8” screw into the housing. Tighten 
all three screws firmly.

     

 CAUTION:  Make sure the upper switch housing is securely 

attached to the switch housing mounting plate. Failure to properly 
attach and tighten all three assembly screws could result in the 
switch housing and light fixture falling.

 
Your Hunter fan comes with an integrated light fixture assembly and an 
optional switch housing cap and plug button. This feature gives you the 
option of installing the fan with OR without the included light fixture. 

If you want to install the light fixture, proceed with step 7-5 now.

If you do not want to install the light fixture, you need to uninstall it 
now. See “Uninstalling the Light Fixture” on page 12. 

 WARNING:  Use only the light fixture supplied with this fan model.

Note: In compliance with US federal energy regulations this 

ceiling fan contains a device that restricts the light kit to a 
maximum of 190 Watts. Exceeding that limit or the marked 
limit on this product may result in fire hazard or improper 
operation.