APC ACSC100 User Manual

Every time you apply power to the cooling unit, the display interface initializes, causing the LEDs to 
cycle and the alarm tone to activate.

After start-up, the interface displays the firmware revision number of the display interface. The display 
interface then scrolls automatically and continuously through screens of status information.

Press the up or down arrow key to interrupt the automatic scrolling and view a specific status screen. 
Screens automatically begin to scroll after five seconds of inactivity. Press the 

E

NTER

 or 

E

SC

 key to return 

to the main menu screen.

On any top-level status screen, press the 

E

NTER

 or 

E

SC

 key to open the 

main menu screen.

APC InRow SC Status 

• On/Standby
• Cooling unit name
• Cooling unit location

Group

• Alarms/No Alarms
• Cool Output kW
• Cool Setpoint °C (or °F)
• Max Rack (Maximum Rack Temperature) °C (or °F)

Unit

• Alarms/No Alarms
• Cool Output kW
• Air Flow CFM (cubic feet per minute) or L/s (liters per second)
• Rack Inlet °C (or °F)

Note: If the display interface is inactive for the time 
configured for the password time-out, it returns to the 
scrolling status screens.

For information on setting the password time-out, see 
page 18.

Note: Pressing the up arrow key from the top line of the 
top screen of the main menu will take you to the top line 
of the bottom screen.

 On/Standby
 View Alarms
 Clear Alarms
 View Event Log

na16

36

f

 Clear Event Log
 Configure Modbus
 Set Date & Time
 Set Password

 Set Display Units
 Configure Display
 Configure Network

 About InRow SC
 Set Identification
 Service Intervals
 View Run Hours

 Configure Unit
 Configure Group
 Set Group Setpoints
 Set Unit Threshlds

 

 

View Group Status

 View Unit Status