Rinnai RHFE-431FA User Manual
FEATURES OF THE RHFE-431FA
UNITS
SAFETY DEVICES
– 1 –
◆ Clean Heating Forced Flue Type
◆ Easy Operation One-Touch Ignition
◆ Sensible Temperature Control Feature
◆ Comfortable Room Temperature Control and Display
◆ Warm Air Outlet at Floor Level (Keeps Your Feet Warm)
◆ Child Safety Lock
◆ Room Temperature Setting Memory
◆ Dirty Air Filter Indicator Lamp
◆ Energy-Saving Economy Setting
◆ Humidifier Tray
◆ Air Flow Directional Louvers
◆ Direct Vent Easily Installed
◆ Proportional Heating Variable Capacity
◆ Hush! Quiet Operation
◆ Modern Design Minimizes Floor Space Requirements
◆ Failure Message Display
Spark Safety Device:
Automatically shuts unit down when there is an abnormal spark at time
of ignition. Display lamps “LOW”, “60”, and “64” will activate if this
happens.
of ignition. Display lamps “LOW”, “60”, and “64” will activate if this
happens.
Flame Failure Device: Activated when burner flame fails, indicator lamp “ON” flashes. If
burner fails to ignite, indicator lamp “60” flashes. This prevents raw
gas from being released.
gas from being released.
Overheat Switch:
This device automatically cuts the gas off if the heater exceeds a
predetermined temperature. This is normally caused by an
obstruction in front of the louvers, or a blocked fan filter. Indicator
lamp “68” “ON” and the “FILTER” indicator lamp flash when overheat
switch is activated.
predetermined temperature. This is normally caused by an
obstruction in front of the louvers, or a blocked fan filter. Indicator
lamp “68” “ON” and the “FILTER” indicator lamp flash when overheat
switch is activated.
Two Fusible Links:
Backs up the overheat switch. If the fusible link cuts the unit off, a
service call by an authorized person is required to replace the link.
Indicator lamps “68” , “FILTER” and “ON” will flash.
service call by an authorized person is required to replace the link.
Indicator lamps “68” , “FILTER” and “ON” will flash.