Rinnai RHFE-431WTA User Manual

– 21 –

2. Fit the locking clamp over connection between
sliding tube and manifold.  Engage the hook and
rotate it until it snaps against the body of the clamp.

3. Fit the screw clamp between the sliding tube and
the flue elbow.  Secure with the 4mm screws
supplied.  The flue outlet is now locked into position.

4. Slide the insulation sleeve up to the flue
manifold, slip the securing clip over the sleeve as
shown.

When servicing unit replace plastic tie with new one.
(Available at local hardware store or contact local
distributor.)

LOCKING CLAMP SCREW CLAMP AND
INSULATION.
The following components can be fitted by reaching
down the rear of the appliance as it is positioned
against the wall.

1. Connect the flue outlet to the manifold by
extending the stainless steel sliding tube until it is
fully inserted into the manifold.

Detail of Hose clip

Hose clip

Inlet hose

Manifold

Locking
clamp

Flue outlet
Sliding tube

Manifold

Hook

Locking
Clamp

Flue elbow

Flue Outlet
sliding tube

Manifold

Locking clamp

screw

Flue Outlet tube
screw clamp

Flue elbow

Sock

Flue outlet
Sliding tube

Slide to here

Fit clip

Slide insulation sock

Sliding Tube

Slide

Do not extend flue tube
beyond red line.

Manifold

Inlet hose

Inlet elbow

Plastic tie