Thermo Products MHA1-75N User Manual
All installations and services must be performed by qualified service personnel.
1
Notice to the Installer
Installation of this gas-fired furnace must be performed by a qualified installer in
accordance with all local codes and authorities having jurisdiction. In the absence of
local governing codes, installation shall conform to these instructions and to the
regulations of the National Fuel Gas Code, ANSI Z223.1/NFPA 54-2002 and/or,
National Gas and Propane Installation Codes CSA B149.1, or the latest editions
thereof.
A qualified installer, also referred to in this instruction manual as a “qualified heating
contractor”, is an individual, or agency, that is responsible for the installation and
adjustment of the equipment. A qualified installer is properly licensed and
experienced to install gas-burning equipment in accordance with all local codes and
ordinances.
Any reference to L.P. or propane gas in this manual, any other label, or markings
on the furnace is to be construed to be propane HD-5, a commercial grade of
liquefied petroleum gases composed of a minimum of 90 percent liquid propane
(C
accordance with all local codes and authorities having jurisdiction. In the absence of
local governing codes, installation shall conform to these instructions and to the
regulations of the National Fuel Gas Code, ANSI Z223.1/NFPA 54-2002 and/or,
National Gas and Propane Installation Codes CSA B149.1, or the latest editions
thereof.
A qualified installer, also referred to in this instruction manual as a “qualified heating
contractor”, is an individual, or agency, that is responsible for the installation and
adjustment of the equipment. A qualified installer is properly licensed and
experienced to install gas-burning equipment in accordance with all local codes and
ordinances.
Any reference to L.P. or propane gas in this manual, any other label, or markings
on the furnace is to be construed to be propane HD-5, a commercial grade of
liquefied petroleum gases composed of a minimum of 90 percent liquid propane
(C
3
H
8
).
Material and Workmanship
This furnace was built with the highest quality materials and attention to
workmanship. However, omissions and defects occasionally occur. Before
installing the furnace, inspect the furnace thoroughly. If missing parts, defective
material, or poor workmanship are evident, report the model and serial
numbers imprinted on the furnace rating label to the seller.
workmanship. However, omissions and defects occasionally occur. Before
installing the furnace, inspect the furnace thoroughly. If missing parts, defective
material, or poor workmanship are evident, report the model and serial
numbers imprinted on the furnace rating label to the seller.
Packaging
This is a complete, factory-assembled furnace contained within one package.
However, certain parts, including, air filter(s), air filter rack(s), the venting system
must be assembled to the furnace, in the field.
However, certain parts, including, air filter(s), air filter rack(s), the venting system
must be assembled to the furnace, in the field.
Shipping Damage
If this furnace was damaged during transit, please immediately request the
transportation company inspect the furnace and issue a concealed damage
report. The party receiving the furnace should file the claim for shipping
damage. Report any shipping damage immediately.