Euro-Pro S3306H User Manual

Fit the steam pocket frame with the 

angle adapter onto the extension tube. 
Step 2. If the angle adapter is not 

attached to the steam pocket 
frame, attach as follows: Hold 
the steam pocket frame in one 
hand and the 
angle adapter in 
the other. Insert 
the angle adapter 
into the opening 
of the steam 
pocket frame as 
shown in Fig. 5. Note that the 
flat side on the nozzle must face 
toward the side of the frame with 
the brass pin. Once inserted, 
rotate it 90°.

Step 3. Insert the electrical power cord 

into the outlet. Heating time is 
approximately 4-6 minutes with 
cold water. Filling the steam 
generator with hot water will 
shorten  the heat up time.

Step 1. Connect the steam pocket 

accessory to the steam handle 
with two extension tubes. To 
attach the extension tubes one 
onto the other or onto the hand 
grip, press the locking button 
ensuring that it fits into the hole 
(Fig. 3., Fig. 4) and press the two 
sections together. To disconnect, 
repeat the operation by pressing 
the locking button and pulling the 
two sections apart.

1. Slide the steam 

pocket towel over 
the steam pocket 
frame. (Fig. 6)

2.  Bring the towel all 

the way to the top 
of the steam 
pocket frame. 
(Fig. 7)

3. Bring the hook and 

latch strips that are 
on the back side of 
the steam pocket 
towel over the 
steam pocket frame 
and attach to 
the inside of the 
front side of the 
steam pocket towel. 
(Fig. 8)

Note: If replacing the steam pocket
towel, make sure that the steam pocket 
frame has been allowed to cool before 
removing or attaching a new steam 
pocket towel.

Always insure the unit is 

“UNPLUGGED” from the wall receptacle 
prior to attaching or removing accessories. 

Fig. 4

Fig. 6

Fig. 7

Fig. 8

Fig. 5

Locking Button

Hand Grip

Fig. 3

The steam cleaner has a steam trigger 
lock that automatically engages when 
you depress the steam trigger. (Fig. 2) 
To unlock the steam trigger, just press it 
in the direction of the hose. 

Steam
Trigger Lock

Fig. 2

Due to the unique cleaning ability of this 
cloth, proper care of your micro-fiber towel 
is required to ensure long life and 
continued cleaning ability.
• The first thing you should do when 

you get a new micro-fiber towel is to 
wash and dry it. During the 
manufacturing process the fabric has a 
tendency to become flat as it picks up 
contaminants from the air and 
machinery. There will also be a number 
of loose threads that, while they cause 
no harm, can be annoying the first time 
you use the towel.

• To clean the towel, simply wash it in your 

washing machine using the warm water 
setting.

• Always wash your towels separately 

from other fabrics. They have a tendency 
to pick up lint and other particles from 
other fabrics and the next time you use 
your towel, this lint will transfer to the 
surface being cleaned.

• ONLY USE LIQUID DETERGENTS, 

never use dry detergents as many times 
the granules do not fully dissolve and 
become trapped in the towel. This can 
scratch the surface that you are 
cleaning.

• NEVER USE BLEACH OR FABRIC 

SOFTENERS! Bleach will damage the 
micro-fiber fabric and fabric softeners 
deposit a coating on the micro-fiber 
fabric what will not allow the cloth to 
clean efficiently.

• Air dry the towel. Do not put in a clothes 

dryer as high heat will cause the towel to 
shrink and the micro-fibers to break 
down.

• If you wash your towel on a regular basis 

and don’t let them get too dirty, they will 
last much longer. As with any fabric, dirt 
particles, grease and other contaminants 
can cause the fibers to break down, 
therefore regular cleaning will help 
preserve your micro-fiber towels.

• As you use the micro-fiber towel, you will 

notice that sometimes a thread will 
loosen or pull out. This is normal and 
you should NEVER PULL AT THE 
LOOSE THREAD! Pulling the thread can 
cause the weave to come undone. 
Instead, simply trim the thread with a 
pair of sharp scissors.

Allow the unit to cool for 5 minutes 
before changing accessories.

Window Squeegee
This attachment is very useful for 
cleaning large windows, plastic 
material, ceramic, tiled or marble 
surfaces.

Important: 

When cleaning windows, 

always avoid any sudden changes in 
temperature to prevent glass 
breakage or cracks.

To use: Connect the window
squeegee to the hand 
grip or use with 
extension tube for 
hard to reach surfaces.
Apply steam abundantly, then remove 
excess water and dirt with the glass 
wiping edge. 
Extended Concentrator
Use the extended concentrator 
to clean under toilet rims 
and hard to reach places.
To use: Attach the extended 
concentrator to the handgrip or to 
the extension tubes.

: Be aware of hand placement 

and take care not to actuate the steam 
discharge switch while installing or 
removing accessories.

Nylon Bristle Brush (x2)
It is best for cleaning grout in-between 
the tiles, ceramic and marble.
To use: Screw on the nylon 
bristle brush on to the end 
of the extended
concentrator, which 
then may be used directly 
on the hand grip or with extension 
tubes.