Euro-Pro EP923H User Manual

Attach the concentrator to the 

handgrip or to the extension 

tubes. Then attach the detail 

brushes To the concentrator.

To use: Connect the tile 

squeegee to the hand 

grip or use with 

extension tube for 

hard to reach surfaces.

Apply steam abundantly, rub with the 

soft spongy edge, then remove excess 

water and dirt with the glass wiping 

edge.

IMPORTANT:

When cleaning 

windows, always avoid any sudden 

changes in temperature to prevent glass 

breakage or cracks.

It is best for cleaning grout in-between 

the tiles, ceramic and marble.

To use: Attach the nylon bristle 

brush on to the end of the 

concentrator, which then may 

be used directly on the hand 

grip or with extension tubes 

Note: The Wall Paper Scraper 

is packaged already attached 

to the concentrator. 

To attach the concentrator to 

the flexible hose, push it in 

until the locking button on the hose clicks 

in place with the hole on the concentrator

If the wall paper scraper is not attached to 

the concentrator, screw it on to the 

concentrator.  (Fig. 14)

Note: The wall paper 

concentrator 

cannot be 

used without 

the wall paper 

scraper.

Fig. 14

Use the brass bristle brush to clean 

ovens and hard metal surfaces.

To use: Attach the brass bristle

brush on to the end of the 

concentrator, which then may be used 

directly on the hand grip or with 

extension tubes 

100% white terry cloth towel can be fitted 

on this brush, so as to absorb the dirt and 

protect delicate surfaces. 

Please note that bristles 

may break through thin towels.  We 

recommend that two (2) towels, laid one 

on top of the other be used. This will 

ensure that the brush bristles do not 

break through and that the towels will be 

sufficiently absorbent and retain as much 

dirt as possible.

: When installing the 

towels to the triangular brush, ensure that 

the towels do not cover the front and the 

back of the brush. (See Fig. 13) 

Fig. 10

1. Prepare white terry cloth 

towel: 

size 8” x 17” as 

shown in Fig. 10.

2. Place the brush on 

top of the towel.

4. Place the corner 

under the cloth 
holder. (Fig. 12)

Fig. 11

3. Fold the towel 

as shown in 
Fig. 11

Fig. 12

5. Fold the other side 

of the towel in the 

same way and 

place the corner 

under the cloth 

holder. (Fig. 13)

Fig. 13

VERY IMPORTANT: Use only 

with your steam cleaner. Use of any 

other type of detergent soaps may 

damage the pump mechanism and the 

feed system of the injector. Regular 

detergent soaps SHOULD NEVER BE 

USED with this injector.

To Fill Soap Injector:

1. Remove the filler cap from the soap 

injector.

2. Hold the soap 

injector in your 

hand and place the 

small funnel into 

the opening. 

(Fig. 15)

3. Pour soap into the 

soap injector. 

Do NOT overfill. Do NOT dilute the 

soap solution. Do NOT add water. Do 

NOT mix with any other household 

cleaner.

4. Replace the filler cap onto the soap 

injector.

5. Attach the soap injector to the hand 

grip. (Fig. 16) Make sure that the 

locking button snaps in place. 

(Fig. 17)

6. The soap injector may be used with 

the concentrator or the soap 

accessories. (Fig. 18)

7. To use the soap injector, press on 

the pump button for soap to be mixed 

with the steam. (Fig. 18)

8. When you have finished using the 

soap injector, remove it from the 

hose and attach the accessories that 

were used to the hose so that you can 

remove any excess soap from them or 

run them under warm running water to 

clean.

Note: We recommend using the soap 

solution on hard surfaces such as 

bathroom tile, bathroom fixtures, 

counters. We do NOT recommend 

using the soap on carpeting, upholstery 

or hardwood floors. 

We recommend using the soap injector 

with the soap accessory adapter or the 

concentrator with the bristle brushes. Do 

steam pocket. You can use the 

concentrator to apply the soap.

1. Use the steam to moisten and heat 

up the stain that you wish to remove.

2. Spray the soap onto the surface with 

the stain.

3. Let the soap stay on the stain for 10 

to 15 seconds. Then using a brush, 

scrubbing pad or sponge, scrub the 

stain.

4. Then using the steam, scrub the stain 

some more and then wipe it clean 

with a towel.

5. For stubborn stains, repeat steps 

1 to 4 one more time.

This attachment is very useful for 

cleaning large windows, plastic material, 

ceramic, tiled or marble surfaces.

8

9