FIELD CONTROLS Eliminator Leaflet
Eliminator
®
Helps eliminate moisture, mold, and
radon gas from crawl spaces
Foundation Vent Fan
Phone: 252.522.3031 • Fax: 252.522.0214
www.fieldcontrols.com
©2008 Field Controls Co.
Form #4317
Printed in U.S.A. (2008 CP)
Eliminator Foundation Vent Fans were installed in homes
with high wood moisture content in the 28% to 30%
range. Over a thirty day period, the moisture content was
measured at weekly intervals. Homes with the Eliminator
installed saw a reduction of moisture levels to as low as
16% and 17%. A wood moisture level of 20% or less is
considered ideal. Homes without the Eliminator showed no
reduction in moisture content.
with high wood moisture content in the 28% to 30%
range. Over a thirty day period, the moisture content was
measured at weekly intervals. Homes with the Eliminator
installed saw a reduction of moisture levels to as low as
16% and 17%. A wood moisture level of 20% or less is
considered ideal. Homes without the Eliminator showed no
reduction in moisture content.
"The Eliminator performed well, even under severe moisture
problem conditions… the amount of air moved is sufficient to
correct the problems present."
problem conditions… the amount of air moved is sufficient to
correct the problems present."
Cliff Consulting
Columbia, S.C.
Columbia, S.C.
Independent Test Results
Moisture
Content
Level
week 1
week 2
week 3
week 4
10
20*
30
0
*Ideal wood moisture level= 20% or less
Homes with the Eliminator Foundation Vent Fans installed
Homes without the Eliminator Foundation Vent Fans installed
“The Eliminator effectively reduces radon
gas and moisture levels in the typical
crawl space.”
gas and moisture levels in the typical
crawl space.”
Voltage
115VAC
Amps
.60 Amps
Cubic feet per minute
100 CFM
Housing Material
Galvanized Steel
Number of Units Required
One per 1,000 square feet of
crawl space
Temperature Switch
Operation
Above 50°F
De-humidistat (Optional)
Adjustable from 20%-80%
Mounting Plate Dimensions
14
3
⁄
8
”
x 6
7
⁄
8
”
Specifications
The UV-Aire
®
attacks airborne mold, bacteria,
viruses, and dust mites as they pass through the
HVAC system. When properly positioned over the
A-coil, the UV-Aire also helps kill surface mold.
HVAC system. When properly positioned over the
A-coil, the UV-Aire also helps kill surface mold.
Model shown UV-16/24 (24 volt)
Attack
Moisture
and
Mold
with the
One-Two Punch from Field Controls.
Experts agree. It’s best to attack IAQ
problems at the source. A primary
source of airborne mold can be
moisture in crawl spaces. Team the
Eliminator Foundation Vent Fan with
the UV-Aire air purifier, and you
create a one-two punch that helps
prevent mildew and moisture
problems while reducing airborne
mold, bacteria, and viruses.
problems at the source. A primary
source of airborne mold can be
moisture in crawl spaces. Team the
Eliminator Foundation Vent Fan with
the UV-Aire air purifier, and you
create a one-two punch that helps
prevent mildew and moisture
problems while reducing airborne
mold, bacteria, and viruses.
7027FCHEliminatorBrochure:7027FCHEliminatorBroc11x17 option 2/6/08 4:06 PM Page 2