Hunter Fan 30721A User Manual

43010-01

Air Purifier Maintenance

the top of the filter. The filter will be reinstalled with the same orientation. Refer

to Fig. 12.

4. To install a new filter, position the filter with its rim facing the unit. Refer to Fig

12.

5. Place the bottom of the filter rim behind the ridges on each side of the bottom

of the unit. Refer to Fig. 11.

6. Lift the Filter Tab and press the top of the filter into the Air Purifier. To avoid

damaging the filter, you should press only on the filter’s frame. When the new

filter is in place, release the Filter Tab.

7. Place the front grill back onto the unit. Refer to Figs. 6 and 7, pg. 7. NoTE: This

unit will not operate unless the grill is in the correct position.

8. Plug in the unit.

9. To reset the Filter Life Counter to zero hours and turn off the indicator, press and

hold the HEPAtech

Filter Reset Key for three seconds, then release it.

10. To rest the counter to zero before it expires, press and hold the HEPAtech

Filter

Reset Key for three seconds. When the Indicator begins flashing, release the

Key. Then, once again, press and hold the HEPAtech

lter