IMC Networks IE-iMcV-VDSL2-LANextender 851-18200 Leaflet
Product codes
851-18200
800-624-1070
www.imcnetworks.com
RoHS Compliant
VDSL2
Features and Benefits
Flexible Solution
• Media and protocol converter - converts
10/100BaseT to VDSL
• Operates over existing CAT3 or other
telephone cabling
• Supports VDSL2 for Band Plan
997/998, symmetrical and asymmetrical
transmission per ITU-T G.993.2 standard
transmission per ITU-T G.993.2 standard
• Extended operating temperature of
-40° C to +85° C
Easy to configure and manage with
GUI-based iView²
• Automatically adjusts to reach best
bandwidth performance for the physical
line in use
line in use
• Monitor and control all connections
• Displays maximum VDSL bandwidth
• User selectable Trap on VDSL
• Displays maximum VDSL bandwidth
• User selectable Trap on VDSL
bandwidth level
Eases Troubleshooting
• Features Flow Control, Link Loss,
Link Fault Pass-Through (LFPT) &
Remote Alarm Indication (RAI)
Remote Alarm Indication (RAI)
• Link Quality LED displays maximum
supported bandwidth
• Overflow LED to display congestion on
the VDSL line
IE-iMcV-VDSL2-LANextender
Extend Ethernet services to remote locations or between buildings
with Ethernet over Second Generation VDSL.
VDSL Ethernet LAN Extenders enable LAN and campus network
managers and service providers to use an existing phone-grade
wiring plant to extend 10 Mbps and 100 Mbps Ethernet twisted
pair interfaces by using Ethernet over VDSL; the 100 meter
distance limitation of twisted pair data cabling is no longer a
challenge.
managers and service providers to use an existing phone-grade
wiring plant to extend 10 Mbps and 100 Mbps Ethernet twisted
pair interfaces by using Ethernet over VDSL; the 100 meter
distance limitation of twisted pair data cabling is no longer a
challenge.
Designed with Second Generation VDSL (Very high-bit-rate
Digital Subscriber Line) technology, the IE-iMcV-VDSL2-
LANextender allows the transmission of data over sub-standard
CAT3 and other telephone cabling to achieve higher data rates
than comparable VDSL converters at short distances (less than
100 meters), while supporting asymmetrical data rates on
substantially longer lines (greater than 2 km).
Digital Subscriber Line) technology, the IE-iMcV-VDSL2-
LANextender allows the transmission of data over sub-standard
CAT3 and other telephone cabling to achieve higher data rates
than comparable VDSL converters at short distances (less than
100 meters), while supporting asymmetrical data rates on
substantially longer lines (greater than 2 km).
IE-iMcV-VDSL2-LANextender modules include:
• One VDSL port with an RJ-11 connector
• One 10/100 twisted pair Ethernet port with a
• One 10/100 twisted pair Ethernet port with a
RJ-45 connector
• Auto MDI/MDIX, Auto Negotiation and Selective
Advertising with Flow Control on the 10/100 port
10/100Base-T, Ethernet over VDSL
Technical Specifications
The IE-iMcV-VDSL2-LANextender has been designed to provide the greatest possible transport data rate over a single
pair of unshielded copper wire (CAT3). It allows the user to select either Symmetrical or Asymmetrical data rates on
a short line of less than 2,000 feet. Either selection downgrades to an Asymmetrical data rate on longer lines and
can operate beyond 5,000 feet depending on the condition of the line and the electrical noise environment. At all
times, the four “Quality” LEDs provide an indication of the MAX downstream bandwidth provided by the VDSL line.
This also indirectly indicates the line length and noise on the line in use.
pair of unshielded copper wire (CAT3). It allows the user to select either Symmetrical or Asymmetrical data rates on
a short line of less than 2,000 feet. Either selection downgrades to an Asymmetrical data rate on longer lines and
can operate beyond 5,000 feet depending on the condition of the line and the electrical noise environment. At all
times, the four “Quality” LEDs provide an indication of the MAX downstream bandwidth provided by the VDSL line.
This also indirectly indicates the line length and noise on the line in use.