Delta 50-860 User Manual

Fig. 5

Fig. 6

M O U N T I N G T H E AIR C L E A N E R TO T H E CEILING O R

O V E R H E A D S U P P O R T

W ARNING: THIS TO O L W E I G H S A P P R O X I M ATELY

50 POUNDS. MAKE C E R TAIN T H E UNIT IS S E C U R E-

LY S U P P O R T E D W H E N M O U N T I N G TO A CEILING

O R O V E R H E A D S U P P O R T.

Locate (4) one inch eye-bolts, and (4) 1/4-20 flange

nuts supplied with the unit.

Remove four screws, one of which is shown at (C)

Fig. 5, from the top of air cleaner (D).

Thread one flange nut (E) Fig. 5, approximately half-

way onto each eye-bolt (F) supplied, as shown.

Thread each eye-bolt (F) Fig. 5, into each of the four

holes where screws (C) were removed in STEP 2.

Fig. 6, illustrates the four eye-bolts (F) attached to

top of air cleaner.NOTE: To adjust the height of the air

cleaner, loosen flange nuts (E) and rotate eye-bolts as

necessary.Make certain the flange nuts (E) Fig. 6, are

tightened down against the surface of the air cleaner

after height adjustments are made.

When suspending the air cleaner from the ceiling or

other overhead support, make certain the supporting

hardware (not supplied) is securely anchored into a

wooden supporting structure as shown in Fig. 7.

W ARNING: N E V E R S E C U R E M O U N T I N G H A R D WA R E

TO D RY WALL, DROP CEILING TILE/FRAME, OR NON-

S T R U C T U R A L M E M B E R S.

W ARNING: Keep a minimum of seven feet between bottom of air cleaner and the floor surface.

DO NOT use rope, cable or power cord to suspend the unit from the ceiling. We recommend that a chain should

be used and rated for a minimum of a 100 lb. working load to firmly support the air cleaner. IMPORTA N T:W h e n

determining a location to mount the unit, the air cleaner will operate more efficiently when the air flow is unre-

stricted. Do not locate the unit in a corner or near any heating or cooling vents.

Fig. 7