Coway AP-1008DH User Manual

16

- Always unplug the air purifier before cleaning the product.
-  Do not use detergents that contain organic solvents (solvent, thinner, etc),  

bleach, chlorine, or abrasives.

- Do not put the air purifier in water or spray water directly on it.

Tips

■ Cleaning the pollution sensor (every 2 months)

Air outlet

Air inlet

■ Cleaning the air inlet and outlet (every 2 months)

Clean the air inlet and outlet with a soft brush.

∗ Exercise caution not to have dust fall inside the air purifier.

1.  Open the pollution sensor cover on the 

right-hand side of the product. Clean 

the air inlet and outlet vent and then 

the pollution sensor with a soft brush or 

vacuum cleaner.

Dust outlet

Dust inlet

2.  Wet a cotton swab lightly and clean the lens, dust inlet,  

and dust outlet. Clean them with a dry cotton swab  

to remove remaining moisture.

    

∗ Without regular cleaning, the performance of the pollution sensor deteriorates.

    ∗  The cleaning cycle differs depending on the operation environment.  

When using the product in a dusty environment, clean the sensor more often.

■ Cleaning the product body (every 2 ~ 4 weeks)

Use dry, soft cloth to clean the product.

∗ Use lightly wet cloth if the contamination is serious but do not use abrasives.

■ Cleaning the front cover

Separate the front cover from the product and remove the dust 

attached to the surface with a soft dry brush or cloth.

∗ Use lightly wet cloth if the contamination is serious but do not use abrasives.

▶ 

ADJUST PARTICLE SENSOR

       

CLEANING METHOD

/