Wayne-Dalton AND 9600 User Manual
Tools Needed:
36
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the
Find a Dealer section online at www.Wayne-Dalton.com
REaD THEsE INsTRuCTIONs CaREfully
BEfORE aTTEMPTING TO REsET THE
TORquEMasTER® sysTEM. If IN
quEsTION aBOuT aNy Of THE
PROCEDuREs, DO NOT PERfORM THE
WORk. INsTEaD, HaVE a qualIfIED DOOR
aGENCy REsET THE sysTEM.
BEfORE aTTEMPTING TO REsET THE
TORquEMasTER® sysTEM. If IN
quEsTION aBOuT aNy Of THE
PROCEDuREs, DO NOT PERfORM THE
WORk. INsTEaD, HaVE a qualIfIED DOOR
aGENCy REsET THE sysTEM.
alWays kEEP MOVING DOOR IN sIGHT
aND kEEP PEOPlE aND OBjECTs aWay
uNTIl IT Is COMPlETEly ClOsED. TO
PREVENT a sEVERE OR faTal INjuRy,
aVOID sTaNDING IN a OPEN DOOR Way
OR WalkING THROuGH THE DOORWay
WHIlE THE DOOR Is MOVING.
aND kEEP PEOPlE aND OBjECTs aWay
uNTIl IT Is COMPlETEly ClOsED. TO
PREVENT a sEVERE OR faTal INjuRy,
aVOID sTaNDING IN a OPEN DOOR Way
OR WalkING THROuGH THE DOORWay
WHIlE THE DOOR Is MOVING.
kEEP THE GaRaGE DOOR PROPERly
BalaNCED. aN IMPROPERly BalaNCED
DOOR COulD CausE sEVERE OR faTal
INjuRy. HaVE a qualIfIED sERVICE
PERsON MakE aDjusTMENTs/REPaIRs
TO CaBlEs, sPRING assEMBlIEs, aND
OTHER HaRDWaRE
BalaNCED. aN IMPROPERly BalaNCED
DOOR COulD CausE sEVERE OR faTal
INjuRy. HaVE a qualIfIED sERVICE
PERsON MakE aDjusTMENTs/REPaIRs
TO CaBlEs, sPRING assEMBlIEs, aND
OTHER HaRDWaRE
.
This door is equipped with a
Torquemaster® Plus system, which
provides a safety feature that prevents the
door from rapidly descending in case of
spring failure or forceful manual operation.
Typical sign of an activated system: Door
opens, but will not close; door makes a
distinct “clicking” noise upon opening. If
the system is activated, carefully follow
the reset instructions below.
Torquemaster® Plus system, which
provides a safety feature that prevents the
door from rapidly descending in case of
spring failure or forceful manual operation.
Typical sign of an activated system: Door
opens, but will not close; door makes a
distinct “clicking” noise upon opening. If
the system is activated, carefully follow
the reset instructions below.
1. first, locate and visual inspect the
Torquemaster® Plus end brackets to
determine if the system has engaged (see
illustration).
Torquemaster® Plus end brackets to
determine if the system has engaged (see
illustration).
NOTE: The Torquemaster®
Plus end brackets are located on top of
the door on the right and left hand side.
the door on the right and left hand side.
2. Disengage opener (if installed) by
pulling or placing emergency disconnect in
the manual operated position.
pulling or placing emergency disconnect in
the manual operated position.
TorqueMaster® Plus Reset
Instructions
NO sPaCE BETWEEN
DRuM PaWl aND CaBlE
DRuM
INDICaTEs ENGaGEMENT
CaBlE DRuM
DRuM PaWl
ENgAgEMENT SIDE vIEW
NO sPaCE BETWEEN
DRuM PaWl aND
CaBlE DRuM
ENgAgEMENT UNDERNEATh vIEW
sPaCE BETWEEN DRuM PaWl
aND CaBlE DRuM
NON-INDICaTEs ENGaGEMENT
NON-ENgAgEMENT SIDE vIEW
NON-ENgAgEMENT UNDERNEATh vIEW
5/8” socket
Ratchet Wrench
3” Extension
Vice Clamps
(Pair)
3” Extension
WARNINg
WARNINg
WARNINg
sPaCE BETWEEN
DRuM PaWl aND
CaBlE DRuM
CaBlE DRuM
DRuM PaWl
RaTCHET
PaWl
❉