Genie 4064H User Manual

Page of 27
©2010  The Genie Company 
12/2010
22
ADJUSTMENT GUIDE - 
SPEED SETTINGS 
FOR HELP-1-800-35-GENIE OR WWW.GENIECOMPANY.COM
Speed settings are pre-programmed at the factory 
for the maximum speed.  Speed settings should not 
need adjustment with this unit.
However, travel speed for the opener in both the 
open and close directions can be adjusted to slower 
speeds to minimize normal wear for heavy sectional 
doors.
NOTE: One piece doors are automatically set during 
Limits programming to the slowest speed and 
opener speed cannot be reset for one piece doors.
CHANGE SPEED SETTING
Use this guide to ADJUST powerhead SPEED settings.
There are three (3) Speed settings available on this 
unit for the open and close directions.  Door type 
(one piece or sectional), door weight and balance, 
and condition of door components / track affect 
door speed.  Speed adjustment may not be available 
for some installations depending on these factors.
1. Press 
PROGRAM
SET
 on the powerhead and hold until both 
lights turn steady ON.  Release button.  
Lights go out and Round BLUE light comes ON.
2. Press   two times and the Round BLUE and Long 
BLUE lights come ON.
3. Press 
PROGRAM
SET
 once to enter the Speed Programming 
menu.  The round LED will flash BLUE 3 times, 
then the current Speed setting for UP travel will 
display on the LEDs.  See table below.
4. Press   to raise or   to lower UP Speed settings 
within the available range.   
NOTE: Faster door speeds may not be available.
5. Press 
PROGRAM
SET
 to set UP Speed level.  The long LED will 
flash BLUE 3 times, then the current Speed setting 
for DOWN travel will display on the LEDs.
6. Press   to raise or   to lower DOWN Speed 
settings within the available range.  
NOTE: Faster door speeds may not be available.
7. Press 
PROGRAM
SET
 to set DOWN Speed level. Both LEDs flash 
BLUE to confirm.
Speed Level
Powerhead LEDs
Round LED
Long LED
Default LED display is the current Speed setting
LED Speed indicator colors
Red      Red
Purple      Purple
Blue      Blue 
Speed Level LED indicator colors
MAXIMUM
Red
ON
 
Red
ON
MID
Purple
ON
 
 
Purple
ON
SLOW
Blue
ON
 
 
Blue
ON