Bacharach 24-9351 User Manual

4-13

    MEMORY DIRECTORY

    MEMORY DIRECTORY

«M8 28.7.97  15:45

«98 28.7.97  15:45

 M9 MEMORY EMPTY

 99 MEMORY EMPTY

 CLEAR MEMORY

 CLEAR MEMORY

The Memory Directory Screen is displayed by repeatedly pressing the

key from the Combustion Test Screen. This screen is used to select

a memory location that contains saved data which an operator can re-
view.

NOTE:  A ‘standard’ PCA has 10 memory locations num-
bered M0 thru M9, while an ‘advanced’ PCA has 100 memory
locations numbered 0 thru 99.

To select a data-memory location, first use the 

st

 keys to move the

cursor (

z

) in front of the desired memory location; then press the 

 key.

The saved data is now displayed in either the Combustion Test Screen or
Draft Screen, depending on whether the chosen memory location contains
combustion or draft information. To print the saved data, refer to Sec-
tion 4.23.

After viewing or printing the saved data, use the 

st

 keys to move the

cursor (

z

) to the exit (

E) function; then press   . This will redisplay the

memory directory.

Selecting the 

CLEAR MEMORY function displays the Clear Memory

Screen from where all saved data can be erased (refer to Section 4.24).

– Move cursor (

z

) up

– Move cursor (

z

) down

– Display the data saved at the chosen memory location

– Go to Combustion Test Screen

– Go to Temperature Setup Screen, or the

Memory To PC Screen for Advanced units