Teledyne M300EM User Manual
Advanced Features
Teledyne API – Technical Manual - Model 300E Family CO Analyzers
134
7.4.3.2. Automatic Calibration of the Analog Outputs
To calibrate the outputs as a group with the AOUTS CALIBRATION command, select the ANALOG I/O
CONFIGURATION submenu (see Figure 7-4) then press:
CONFIGURATION submenu (see Figure 7-4) then press:
NOTE
Before performing this procedure, make sure that the AUTO CAL for each analog output is enabled.
(See Section 7.4.3.1)
04288D DCN5752