Sony 900 User Manual
7
Chapter 7 Location and Function of Parts and Controls
136
HDC-900/950/930 Series Product Information Manual
h
BRIGHT control
Adjusts the brightness of the screen. This control has
no effect on the output signals of the camera.
no effect on the output signals of the camera.
i
TALLY switch
Controls the tally indicator e located on the front of the
viewfinder.
viewfinder.
HIGH
: The tally indicator brightness is set to high.
OFF
: The tally indicator is disabled.
LOW
: The tally indicator brightness is set to low.
j
ZEBRA (zebra pattern) switch
Controls the zebra pattern display on the viewfinder
screen as follows:
screen as follows:
ON
: A zebra pattern appears and stays.
OFF
: The zebra pattern disappears.
MOMENT
: A zebra pattern appears and stays for
about 5 seconds.
k
DISPLAY/ASPECT switch
Turns the marker indication on and off, and switches
between 4:3 and 16:9 aspect ratios for viewfinder
screen display.
between 4:3 and 16:9 aspect ratios for viewfinder
screen display.
DISPLAY
: When the marker indication is enabled with
the camera, the marker indication on the viewfinder
screen turns on and off every time you push the
switch up to this position.
screen turns on and off every time you push the
switch up to this position.
ASPECT
: Each push of the switch down to this position
toggles the mask display on and off.
7-15.
HDVF-700A, HD Electronic Viewfinder
7-15-1
Appearance
1
PEAKING control
2
PEAKING switch
3
Friction adjustment knob
4
Lift-lock release knob
5
POWER switch
6
indicator
7
Green tally lamps
8
BRIGHT control
9
Lock lever
q;
CONTRAST control
qa
TALLY ON/OFF switch
qs
BATT indicator
qd
Red tally lamps
qf
External tally lamp
qg
External tally dimmer control
qh
CAMERA connector
qj
Mounting wedge
Front
Rear
Bottom