Lennox Hearth MPDT-3328CPE-B User Manual

Page of 42
2
LENNOX HEARTH PRODUCTS  •  MERIT
®
 PLUS DIRECT VENT GAS FIREPLACES (MPD33/35/40/45)  •  INSTALLATION INSTRUCTIONS
PACKAGING
The  assembled vented gas fireplace heater  is 
packaged with:
 (1 set) Logs (packaged in a carton inside the 
firebox).
 (1 bag) Glowing Embers (in bottom compart-
ment).
 Literature  Kit  (envelope  in  bottom  com-
partment  containing  Care  and  Operation 
InstructionsInstallation Instructions, Safety-
In-Operation Warning Labels, Warranty).
 (1) Vent Restrictor (attached to Literature Kit 
envelope).
 (1) Hood (inside firebox).
INTROdUCTION 
The Millivolt appliances have a millivolt gas 
control valve with piezo ignition system. If any 
optional accessories that will require electrical 
power are to be installed, the electrical power 
must  be  provided  at  the  time  of  appliance 
installation. 
The Electronic appliances are designed to op-
erate on natural or propane gas. An electronic 
intermittent pilot ignition system provides safe, 
efficient operation. External electrical power is 
required to operate these units. 
These  vented  gas  fireplace  heaters  are  sealed 
combustion,  air-circulating  gas  fireplaces  de-
signed for residential applications. 
Approved Vent Components
These fireplaces are designed, tested and listed 
for operation and installation with the following 
vent components only:  
   
Secure Vent™ Direct-Vent System Compo-
nents  manufactured  by  Security  Chimneys 
International, 
   
Secure  Flex™  Flexible  Vent  Components 
manufactured  by  Security  Chimneys  Inter-
national and 
   
Z-FLEX™ Model GA Venting Systems listed 
to UL1777 and ULCS635 manufactured by 
Flexmaster Canada Limited. 
Use only the correct size venting (4-1/2" inner 
and 7-1/2" outer).
These approved vent system components are 
labeled  for  identification.    DO  NOT  use  any 
other  manufacturer’s  vent  components  with 
these appliances. 
TABLE OF CONTENTS 
Packaging .................................................... 2
Introduction ................................................. 2
General Information ..................................... 2
Requirements for the 
   Commonwealth of Massachusetts ............ 4
New York City Approval ................................ 4
Cold Climate Insulation ................................ 5
Manufactured Home Requirements ............. 5
Location 5
Vent Termination Clearances  ....................... 6
Appliance and Vent Clearances .................... 8
Pre-Installation Steps ................................. 10
Typical Installation Sequence  .................... 10
Detailed Installation Steps .......................... 10
Step 1. Framing .......................................... 10
   Fireplace and Framing Specifications ....... 11
Step 2. Routing Gas Line ........................... 12
Step 3. Preparing Appliance Vent Collar ..... 13
Step 4. Installing Vent System ................... 13
   Vertical Termination Systems .................. 14
   Vent Section Length Chart ...................... 14
   Vertical Vent Tables and Figures .............. 17
   Horizontal Termination System ............... 19
   Horizontal Vent Tables and Figures ......... 21
   Venting Using Flexible Vent Pipe ............. 24
Step 5.  Field Wiring ................................... 25
Step 6.  Optional Blower Kit Wiring ............ 26
Step 7.  Connecting Gas Line ..................... 26
Step 8.  Verifying Appliance Operation ........... 27
Step 9.  Installing Logs  ............................. 28
Step 10. Remove/Install Glass Door  .......... 32
Step 11. Burner Adjustments ..................... 32
Step 12. Hood Installation .......................... 34
Finishing Requirements ............................. 34
Step 13. Attaching Safety-in-Operation 
    Warnings ................................................ 35
Installation Accessories ............................. 36
Gas Conversion Kits .................................. 38
Please read and understand these 
instructions before beginning your 
installation.
 
Children and adults should be alerted to the 
hazards  of  high  surface  temperature  and 
should stay away to avoid burns or clothing 
ignition. 
Les enfants et les adultes devraient être 
infor-més  des  dangers  que  posent  les 
températures  de  surface  élevées  et  se 
tenir à distance afin d’éviter des brûlures 
ou que leurs vêtements ne s’enflamment.
dO  NOT  ATTEMPT  TO  ALTER  OR  MOdIFY 
THE  CONSTRUCTION  OF  THE  APPLIANCE 
OR ITS COMPONENTS. ANY MOdIFICATION 
OR ALTERATION MAY VOId THE WARRANTY, 
CERTIFICATION ANd LISTINGS OF THIS UNIT.
       WARNING 
Young children should be care-
fully supervised when they are 
in the same room as the appli-
ance. Toddlers, young children 
and others may be susceptible 
to accidental contact burns.  A 
physical barrier is recommended 
if there are at risk individuals in 
the house.  To restrict access to 
a fireplace or stove, install an 
adjustable  safety  gate  to  keep 
toddlers,  young  children  and 
other at risk individuals out of 
the  room  and  away  from  hot 
surfaces.
       AVERTISSEMENT 
Les jeunes enfants devraient être 
surveillés étroitement lorsqu’ils 
se trouvent dans la même pièce 
que l’appareil. Les tout petits, 
les jeunes enfants ou les adultes 
peuvent subir des brûlures s’ils 
viennent en contact avec la sur-
face chaude.  Il est recommandé 
d’installer une barrière physique 
si des personnes à risques habi-
tent la maison.  Pour empêcher 
l’accès à un foyer ou à un poêle, 
installez une barrière de sécu-
rité; cette mesure empêchera les 
tout petits, les jeunes enfants et 
toute  autre  personne  à  risque 
d’avoir accès à la pièce et aux 
surfaces chaudes.
GENERAL INFORMATION