Regency P40-NG User Manual

Regency

®

 P40 Direct Vent Gas Fireplace

MAINTENANCE

2)  Remove the main gas line pipe from the
 gas 

valve.

3)  Remove logs and brick panels if installed.

4)  Remove the fender by undoing the 2 screws, 

one on the left and right side.

5)  Remove the front air box by undoing the 3 

screws.

6)  Remove the front burner by removing the 2 

screws and swing the burner to the left and 
slide out.

7)  Carefully remove the base brick panel.

8)  Remove the 2 screws on the back burner.

9)  Slide burner to the right and lift out.

10)  Remove back air box by removing 2 screws, 

one on the left and one on the right side and 
pull out.

14) Remove all 22 valve tray screws and care-

fully lift out the valve tray.

11) Unplug the 3 black wires at the DC 

Sparker.

12) Unplug the 5 wires at the valve (2 grey, 2 

red and 1 black.

13) Reach in and grab the black and red wires 

leading to the solenoid valve and disconnect 
them.