Regency L900-1 User Manual

Regency

®

 L900-1 Direct Vent Gas Fireplace

INST

ALLA

TION

IMPORTANT: Must install 1 set of brick panels. The operation of this unit without the brick panels is prohibited.

  Remove the glass door.

 

a. Release the 2 door latches on the left and right side at the top of  
    the fi rebox.

  b. Swing the door out from the top and release the hinge on the left 

side of the door and lift out.

  c. Place the door on a soft surface to prevent scratching.

   Unwrap the brick panels from the protective wrapping.

   Remove the 2 brick panel clips on the inside top left and top right 

side of the fi rebox by removing the screw.

Remove the right side mesh by gathering the mesh together and 
lifting the curved end of the rod up and out of the bracket located on 
the top right of the glass frame.

 

Now slide the straight end of the rod out from the bracket located on 
the middle inside top of the outer shell. Repeat for left side.

  Remove the front cover plate by lifting up off of the pins on the left 

and right side of the fi rebox.