Regency P33-NG4 User Manual

Regency

®

 P33-4 Zero Clearance Direct Vent Gas Fireplace

12

If using any Cabinet Mantels with Part # 
510956, 510958, 510962, 510964 and 
510834 the wall thimble must be secured fi rst 
and venting must be attached to unit before 
sliding into fi nal position.

Also Rigid Vent venting cannot be used with 
any of the mantels noted above. See Price 
Pages for alternative options.

This venting system, in combination with the P33-4 Direct Vent Gas Fireplace, have been tested and listed as a direct vent heater system by Warnock 

Hersey. The location of the termination cap must conform to the requirements in the "Exterior Vent Terminal Locations" Section .

feet. If installing the P33 with a continuous vent length of more than 2 ft (.6m) to a maximum of 10 ft. (3.0m) use Kit # 946-515 (4 ft) or 946-516 

(10 ft) or see "Rigid Pipe Venting Systems" Section for alternate venting arrangements.

1)  6-7/8" dia. fl exible liner (2 ft. length)

2)  4" dia. fl exible liner (2 ft. length)

3) spring 

spacers 

(3)

4) thimble 

(2)

5)  AstroCap termination cap (1)

6) screws 

(12)

7)  tube of Mill Pac (1)

8) plated 

screws 

(8)

9)  screws #8 x 1-1/2" drill point, 

 stainless 

steel 

(4)

6-7/8"

(173mm)

dia. Flue pipe

4" (102mm)

dia. flue pipe

Wall Thimble (2 pc)

(required in

Canada only)

Termination Cap

(Part# 946-523/P)

spring
spacer