Regency L900-NG1 Leaflet

Page of 2
Model
L900-NG1
L900-LP1
Fuel Type
Natural Gas
Propane
Minimum Supply Pressure
5” W.C.(1.25 kPa)
12” W.C. (3.00 kPa)
Manifold Pressure - High
3.5” W.C. (0.87 kPa)
10” W.C. (2.49 kPa)
Manifold Pressure - Low
1.6” W.C. (0.40 kPa)
6.4” W.C. (1.59 kPa)
Orifi ce Size
#30 DMS
#49 DMS
Minimum Input 
Altitude 0-4500 ft. (0-1372m)
28,000 BTU/h (8.20 kW)
31,000 BTU/h (9.08 kW)
Maximum Input
Altitude 0-4500 ft. (0-1372m)
41,500 BTU/h (12.16 kW)
38,500 BTU/h (11.28 kW)
Vent Sizing
5” Inner / 8” Outer
5” Inner / 8” Outer
Unit Dimensions
Description
L900-1
A
Firebox Width w/ Standoff
51-1/2” (1308mm)
B
Rear Firebox Width
40-5/8” (1032mm)
C
Firebox Height
41-3/8” (1051mm)
D
Height w/ Standoff
50-3/8” (1270mm)
E
Unit Depth
27” (686mm)
F
Height to Vent
44-1/2” (1130mm)
G
Fireplace Opening Height 
32-1/16” (814mm)
H
Fireplace Opening Width
33-5/8” (853mm)
I
Height to Fireplace Opening
3” (76mm)
L900-1 Gas Fireplace
Approved Venting Systems
Flex Vent Systems:
FPI AstroCap™ Flex Vent
Rigid Pipe Vent Systems:
Simpson Direct Vent Pro®
Selkirk Direct-Temp™
Metal-Fab® Sure Seal
Regency Liberty L900 Gas Fireplace
Unit Dimensions:
Framing Dimensions:
Non-Combustible Requirements:
Framing Dimensions
Description
L900-1
J
Framing Width
52” (1321mm)
K
***
Framing Height
***
50-3/4” (1289mm)
*** 
+ Hearth
L
Framing Depth
26-1/2” (673mm)
M
Minimum Height to Combustibles
60” (1524mm)
N
Corner Wall Length
63-15/16” (1624mm)
O
Corner Facing Wall Width
90-7/16” (2286mm)
P
Vent Centerline Height
53” (1346mm)
Q
Non-combustible facing height
17-7/16” (443mm)
R
Gas Connection Opening Height
2” (51mm)
S
Gas Connection Height
11-1/4” (286mm)
T
Gas Connection Inset
6” (152mm)
U
Gas Connection Opening Width
5” (127mm) 
***
Important:  Framing height requires consideration of the hearth 
depth.   Dimension K = K + the thickness of installed hearth.
WARNING
Failure to maintain required clearances is a major cause of chimney related fi res.  
Installation of this fi replace must comply with these clearances
Please note:
 Due to ongoing product development, product appearance and specifi cations 
are subject to change without notice.
This manual is intended to be a Sales Reference Guide only.
Do NOT use for actual framing and installation of any unit. 
Some specifi cations may change without notice.
You must use the actual manual for exact installation specifi cations.