Regency P48-2 User Manual

Regency

®

 P48-2 Zero Clearance Direct Vent Gas Fireplace

6)  Remove the burner by removing the screw 

on the left side and then slide the burner to 
the left and lift out.

7)  Remove the right and left side defl ectors by 

removing the 2 screws on each defl ector.

1)  Shut off the gas supply.

2)  Remove the louvers (and bay door if it has 

been installed).

3)  Open the fl ush door and remove the door.

4)  Remove the logs and side brick panels, if 

installed.

5)  Remove the grate by lifting up and out.

8)  Remove the base brick panels.

9)  Disconnect the inlet gas line. 

10) Remove the 10 Phillips head screws securing 

the valve tray assembly in place and then 
lift the entire assembly out.

11) Disconnect the 2 TP wires and the 2 TH 

wires from the valve.

12) Undo the pilot tube from the valve with a 

7/16" wrench.

13) Undo the quick drop out thermocouple nut 

on the valve with a 9mm (metric) wrench.

14) Remove the Piezo igniter wire and push 

button assembly.  

15) Undo the "gas out" fl are nut with a 13/16" 

wrench.

16) Undo the "gas out" fl are fi tting with an 11/16" 

wrench.

17) Remove the 4 Phillips head screws from 

the sides of the valve bracket and remove 
valve.