Regency P33R-NG2 User Manual
Regency P33R-2 Zero Clearance Rear Vent Direct Vent Gas Fireplace
26
INSTALLATION
CAUTION: Label all wires
prior to disconnection
when servicing controls.
Wiring errors can cause
improper and dangerous
operation.
prior to disconnection
when servicing controls.
Wiring errors can cause
improper and dangerous
operation.
Caution: Ensure that the wires do
not touch any hot surfaces and are
away from sharp edges.
not touch any hot surfaces and are
away from sharp edges.
WIRING DIAGRAM
This heater does not require a 120V A.C. supply for operation. In case of a power failure, the burner switch and the optional remote control/thermostat
will continue to operate. However, a 120V A.C. power supply is needed for the fan/blower operation.
will continue to operate. However, a 120V A.C. power supply is needed for the fan/blower operation.
(Do not cut the ground terminal off under any circumstances.)
NOTE: Even if the fan is not purchased with the unit, it is still a good idea to bring power to the receptacle box (provided with
the unit) in case the fan is installed at a later date.