Regency P121 User Manual

Regency

®

 P121-2/P121LC-2/P121RC-2/P131-2 Zero Clearance Direct Vent Gas Fireplace

25) Locate the ground lug at the receptical 

box, left of the unit.

26) Connect one end of the supplied green 

ground wire to the lug with the nut and 
washer from the kit. 

27) Install the 1/2" bushing to the heat shield.

29) Plug the DC spark generator wires to the 

DC Sparker.

30) Connect the ground wire to the DC 

Sparker mounting bracket.

32) Mount the heat shield to the DC Sparker.  

Secure into place with the velcro, which is 
provided in the kit.

34) Tie up the loose wire with the wire clip.

28) Run the other end of the ground wire and 

DC spark generator wires through the 
bushing on the heat shield. 

33) Find a location which is not too hot and is 

easy to reach for changing the  

 

battery. 

35) Check for gas leaks.

36) Check inlet and outlet pressures.

37) Check operation of fl ame control.

38) Check for proper fl ame appearance and 

glow on logs. 

31)  Install the supplied battery into the DC Sparker 

Box by opening the battery compartment.

 NOTE: The battery in the DC Sparker Box 

will need to be replaced annually.