Quadra-Fire 7051-158B User Manual

Page  24

7051-158B

December 6, 2011

R 

Vent termination location - vertical or horizontal

Venting clearances

Outside air location (3 options)

Electrical connection

Location of thermostat wall control

Clearance to combustibles

Mantel projection fuel loading clearances

Sidewalls, surrounds and trim clearances

Hearth extension fl oor protection

Height for loading fuel into hopper if installed on a 
raised platform

Allow enough clearance to open front when 
installing fi nishing material that protrodues 
beyond the mounting frame.

Thickness of fi nishing material

Service space clearances

The thermostat wall control’s location will have some affect 
on the appliance’s operation.

•  Maximum wire length from appliance is 100 feet (30.48m) 

continuous unspliced wire.  Recommended 20 gauge wire, 
solid copper 

.

• 

When located close to the appliance, it may require a 

slightly higher temperature setting to keep the rest of the 
house comfortable.

• 

When located in an adjacent room or on a different fl oor 

level, you will notice higher temperatures near the appli-
ance.

Wire Nuts
7/16 inch Socket Wrench
Framing Square
Electric Drill & Bits 
Self-Tapping Screws
Outside Air Required
Class L or PL Pellet Vent

May also need:
Vent Support Straps

Reciprocating Saw
Hammer
Phillips Screwdriver
Tape Measure
Plumb Line
Level
Framing Material
Hi-temp Caulking Material
Gloves
Safety Glasses

• 

Open the appliance and remove all the parts and articles 
packed inside the Component Pack.  Inspect all the parts 
and glass for shipping damage.  

•  Report to your dealer any parts damaged in shipment.

• 

All labels have been removed from the glass door.

•  Plated surfaces have been wiped clean with a soft cloth, 

if applicable.