Regency E21-NG1 User Manual

Regency E21 Gas Fireplace Insert

1)  Hold the full screen door up against the unit in order to make the 

following wire connections.

 

Pull the ON/OFF connector wires thru the box and connect them to 

the switch.

 

Connect the fan switch wires with the wire connectors from the fan 

speed control. Place clips over wires and tuck into side trim. 

2)  Lift the unit up slightly and push down on the corners of the Bottom 

Trim Bracket and slide under unit.

3)  Completely secure full screen door to the unit by securing 4 screws 

to the Left and Right Side Trim.

4)  Secure the Top Frame by sliding it on the screws at the top of the full 

screen door. It is held in place by magnets.