Procom V50HYLD User Manual
This heater is for use on 120 volts only. The cord has a plug as shown at A in the following figure.
An adapter as shown at C is available for connecting three-blade grounding-type plugs to
two-slot receptacles. The green grounding lug extending from the adapter must be connected to
a permanent ground such as a properly grounded outlet box. The adapter should not be used if
a three-slot grounded receptacle is available.
An adapter as shown at C is available for connecting three-blade grounding-type plugs to
two-slot receptacles. The green grounding lug extending from the adapter must be connected to
a permanent ground such as a properly grounded outlet box. The adapter should not be used if
a three-slot grounded receptacle is available.
Warning: Before servicing this heater be sure to unplug heater from wall outlet. Do not only turn off heater
from the main “ON/OFF” switch, be sure to unplug this heater.
(Adaptor NOT permitted in Canada)
Under CZ22.2 NO. 0 standard
SPECIFICATIONS:
Model:V50HYLC
Voltage: 120V/60HZ Total Amps: 11.3A
Total Watts: 1345W Heating Ratings: 1200W
Dimensions, Inches (H x W X D)
Fireplace 24-3/4”x23-3/8”x13-3/8”
Carton 27-1/2”x29-3/8”x15-3/8”
Weight, Pounds
Fireplace 35
Shipping 45
5
Model: V50HYLD
Voltage: 120V/60HZ Total Amps: 11.3A
Total Watts: 1345W Heating Ratings: 1200W
Dimensions, Inches (H x W X D)
Fireplace 24-7/8”x23-7/8”x13-7/8”
Carton 27-1/2”x29-3/8”x15-3/8”
Weight, Pounds
Fireplace 35
Shipping 45
6