Regency L234-LP User Manual

Regency

®

 L234 Direct Vent Gas Insert

MAINTENANCE

1)  Open the left and right side faceplate 

panels.

2)  Remove the bottom louver by pulling out.

3)  Remove the glass door.

 

a)  Pull off the left side spring hook that holds 
the door in place.  While holding the hook turn 
it upside down and place it into the middle 
opening on the top side mounting bracket. 
Repeat for right side

. 

Swing the door out 45 degrees and lift up 

and out.

7)  Disconnect the gas connection to the 

valve.

8)  Disconnect the ignitor wire from the DC 

Sparker.

9)  Disconnect the valve wires from the DC 

Sparker.

10) Unplug the 2 connectors from the valve.

4)  Remove the logs.

5)  Remove brick panels, if installed.

6)  Remove the valve shield by undoing the 2 

screws.