MASTER LOCK 70000 BTU/Hr User Manual

5

101585

1. Remove all packing items applied to heater for shipment.
2. Remove all items from carton.
3. Check items for any shipping damage. If heater is damaged, promptly inform

dealer where you bought heater.

(For 100,000 and 150,000

BTU/Hr Models Only)

These models are furnished with wheels and handles. Wheels, handles, and the
mounting hardware are found in the shipping carton.

• Medium Phillips Screwdriver
• 3/8" Open or Adjustable Wrench
• Hammer

1. Slide axle through wheel support frame. Install wheels on axle.

IMPORTANT:

When installing wheels, point extended hub of wheels toward

wheel support frame (see Figure 4).

2. Place cap nuts on axle ends. Gently tap with hammer to secure.
3. Place heater on wheel support frame. Make sure air inlet end (rear) of heater is

over wheels. Line up holes on fuel tank flange with holes on wheel support
frame.

4. Place front handle and rear handle on top of fuel tank flange. Insert screws

through handles, fuel tank flange, and wheel support frame. Attach nut finger
tight after each screw is inserted.

5. After all screws are inserted, tighten nuts firmly.

Wheel
Support
Frame

Wheel

Cap Nut

Axle

Extended
Hub

Hot Air
Outlet

Fuel
Tank
Flange

Screw

Front
Handle

Rear
Handle

Air
Inlet

Nut