Pelco C2400M-B User Manual

 

C2400M-B  (1/06)

3

 

Heater and defroster kits in the HD35/HD3515 Series are designed for enclosures in the EH3500 
Series and EH3515L Legacy

 

®

 

 Series. The HD35 heater and defroster kit is designed for enclosures 

only in the EH3508 Series and EH3512 Series. The HD3515 heater and defroster kit is designed for 
enclosures only in the EH3515 Series and EH3515L Legacy Series.

These kits contain a thermostatically controlled heater and a continuous-duty defroster. The heater 
turns on when the temperature drops to 50°F (10°C) and turns off when the temperature reaches 80°F 
(27°C).

The heater and defroster are attached to a bracket that replaces the window brackets currently used 
to hold the viewing window in place. Because of this bracket, the viewing window size is reduced to 
a two-inch (5.08 cm) diameter circle.

The HD3515 heater and defroster kit contains two heaters. You install one heater in the front of the 
enclosure and the other heater in the rear of the enclosure. The rear heater is attached to a rear heater 
bracket, and the rear heater bracket attaches to the rear of the enclosure. If you are also installing a 
blower kit, you install the rear heater bracket between the blower and rear of the enclosure. 

 

HD35-1

Heater and defroster kit for EH3508 and EH3512 enclosures; 120 VAC; 25 watts

HD35-2

Heater and defroster kit for EH3508 and EH3512 enclosures; 24 VAC; 20 watts

HD35-3

Heater and defroster kit for EH3508 and EH3512 enclosures; 230 VAC; 43 watts

HD3515-1

Heater and defroster kit for EH3515 and EH3515L enclosures; 120 VAC; 25 watts

HD3515-2

Heater and defroster kit for EH3515 and EH3515L enclosures; 24 VAC; 20 watts

HD3515-3

Heater and defroster kit for EH3515 and EH3515L enclosures; 230 VAC; 43 watts