Pelonis HC-451 User Manual

Page of 4
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
ADDITIONAL FEATURES 
This heater has additional features:  
•  Ambient Temperature Sensor  – senses the surrounding room temperature 
and automatically adjusts the heat output. 
•  Safety Tip Over Switch – shuts the heater off if it tips over. 
•  Convenient Carry Handle – allows for easy transport from room to room. 
 
 TROUBLESHOOTING 
If your heater fails to operate, please follow these instructions:  
•  Ensure that your circuit breaker or fuse is working properly. 
•  Be sure the heater is plugged in and that the electrical outlet is working 
properly. 
•  Check for any obstruction.  If you find any obstruction, turn the heater “OFF”.  
Unplug the heater and wait a few minutes for it to cool down.  Carefully 
remove the obstruction.  Plug the heater in and turn it on again by referring to 
the OPERATING INSTRUCTIONS
NOTE:  IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE SEE THE 
WARRANTY INFORMATION FOR INSTRUCTIONS.  PLEASE DO NOT ATTEMPT TO 
OPEN OR REPAIR THE HEATER YOURSELF.  DOING SO MAY VOID THE WARRANTY 
AND COULD CAUSE DAMAGE OR PERSONAL INJURY.  IF THE PROBLEM STILL 
PERSISTS, PLEASE CONTACT US BY REFERRING TO THE SERVICE & SUPPORT 
INFORMATION ON THE FOLLOWING PAGE.     
 
 CLEANING AND STORAGE 
It is recommended that the heater be cleaned at least one time during the operating 
season in order to provide the optimum level of performance.  ALWAYS TURN THE 
POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE CLEANING
.  Be sure to save 
the box for off-season storage. 
•  Turn the heater “OFF”, unplug it and wait for the heater to cool down. 
•  Use a dry cloth to clean only external surfaces of the heater. 
•  Do not use any cleaning agents or detergents. 
•  Never immerse the heater in water. 
•  Pack the heater in the original carton and store it in a cool and dry place 
 
 
SPECIFICATIONS
Model No.: HC-451 
Voltage: 120V, 60Hz 
Current:  Maximum continuous draw: 12.5 Amps 
Output: 5200 BTUs 
Power: Variable from 350W to 1500W. 
Tolerances on all specifications: Approximately +5%, -10%.