Dimplex VCX1525-WH User Manual

16  

www.dimplex.com

Lift to 

remove

Glass 

assembly

①

  Disconnect power supply to 

the fireplace either by unplugging 

the fireplace or switch off at the 

breaker panel.

②

  Remove glass assembly. 

Remove the screws securing the 

glass assembly on the chassis 

(Figure 4).  

③

  Hold on to the glass assembly 

with both hands then lift the whole 

assembly straight up to remove 

(Figure 11).

④

  Remove the two (2) screws 

securing the light block as shown 

in Figure 12, then remove the 

light block.

⑤

  Reach in and turn the burnt 

bulb(s) counterclockwise to 

remove.

 WARNINg:  Disconnect 

power before attempting any 

maintenance or cleaning to 

reduce the risk of fire, electric 

shock or damage to persons.

Turn unit off, allow at least five (5) 

minutes for light bulbs to cool

before touching bulbs to avoid 

accidental burning of skin.
Light bulbs need to be replaced 

when you notice a dark section 

of the flame. There are two (2) 

bulbs, which generate the flames.
Tool Requirements: Philips 

screw driver
Helpful Hints
It is a good idea to replace all 

light bulbs at once if they are 

close to the end of their rated life. 

Group replacement will reduce 

the number of times you will need 

to open the unit to replace light 

bulbs.
Light Bulb Requirements
Quantity of two (2) 60 Watt 

chandelier or candelabra bulbs 

with E-12 (small) socket base, 

120 Volt.
Do not exceed 60 Watt per bulb