Desa W32KPA User Manual

Page of 6
Tools required:
•   #2 Phillips screw driver (3 
1
2
" minimum length)
•  Slotted screw driver 
•  Measuring tape
•  Pencil
•  Drill Driver
If  any  wood  pieces  are  missing  or  damaged,  contact  the 
dealer where you purchased this mantel for replacement. 
If hardware or trim is missing or damaged, contact DESA 
Heating Products at 1-866-672-6040 for referral and war-
ranty information. You can also visit DESA Heating Products' 
technical service web site at www.desatech.com.
Note: Gather all mantel pieces together before assembling 
mantel. 
 WARNING: Only use 1 
1
/
4
" screws in pocket holes to 
assemble mantel. Damage to mantel will result if other 
screws are used for this purpose.
 WARNING: Use only 1/2" or 3/4" screws with brack-
ets in hardware pack 118983-01. Damage to mantel will 
result if other screws are used for this purpose.
W32KCSA and W32KPA 
Wall Mantel and Base with Trim
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Important: Read entire instruction sheet before 
assembling or installing mantel kit.
These mantels are only approved for use with any 
DESA Heating Products 32" electric fireplace sys-
tem or firebox. Do not use mantel with any other 
product.
This mantel kit contains the following:
•  Mantel pieces (unassembled)
•  Hardware package 
117197-14
•  Black trim kit  
PT32
•  Trim kit hardware  
102866-01
•  Bracket hardware kit (2) 
118983-01
The hardware package 117197-14 contains the following:
•   64 - 1 
1
4
" Screws
•   2 - Trim Plate
•   4 - Set Screws
•   2 - Trim Shim
•  2 - 3" Screws
The bracket hardware kit 118983-01 contains the following:
•  13 - Brackets
•  2 - Flat Brackets
•  36 - Wood Screws
Firebox
Perimeter
Trim Included
With This
 
Mantel
www.desatech.com