FireplaceXtrordinair 95400413 User Manual

564 SS / 564 E Rectangular Face

Black 95400411 Nickel 95400413

Page 6 of 6

7/19/07

Place the face, face down, on a soft, non-scratching surface. Install the 564 Electric mounting brackets onto

the back of the face.

Remove and

discard the

hinge assembly

from the face.

Attach the lower 564 E bracket (and

shim). Use the nuts removed earlier and

one of the nuts included with this kit.

Attach the upper 564 E

bracket (and shim). Use the

nuts included with this kit.

Repeat steps “a” through

“c” for the opposite side.

Before installing the

face verify the lower

grill is centered.

Loosen the nuts and

adjust if necessary.

Pull the electric fireplace out of the mantel (or built-in location). Attach the cove covers and face following the

directions below. Slide the fireplace back into place to complete the installation.

Tilt the face back slightly and

insert the bottom hooks into

the slots on the fireplace.

AAAAAAAAAAA

AAAAAA

AAAA

AAA

Lift the face up slightly, tilt

it forward and insert the

top hooks until the face

locks in place.