Lochinvar SPS0250 User Manual
3
1
General Information
Before starting work, the Installer must read, understand and note these installation and operating
instructions.
instructions.
WARNING
The solar pump station may only be installed and maintained by trained professionals. Trainees may
only work on the product under the supervision of an experienced person.
only work on the product under the supervision of an experienced person.
WARNING
All instructions in this Installation & Operation manual should be observed when using the solar
station. No other form of use is intended.The manufacturer is not liable for any damage resulting from
misuse of the solar station. For safety reasons, modifications or changes are not permitted.
station. No other form of use is intended.The manufacturer is not liable for any damage resulting from
misuse of the solar station. For safety reasons, modifications or changes are not permitted.
WARNING
■ The solar station must be installed as far away from the collectors as possible. Extremely high
temperatures may occur in the pipes near the collectors. If installing in attic space, ensure that
the instruments do not overheat.
temperatures may occur in the pipes near the collectors. If installing in attic space, ensure that
the instruments do not overheat.
■ The pressure / temperature operating parameters must be within the prescribed limits. Excess
operating temperatures should be avoided for continuous operation.
operating temperatures should be avoided for continuous operation.
■ The provisions stated in DIN EN 12976-1 should be observed when installing solar systems.
■ The expansion tank should be regularly checked according to DIN 4807.
■ Solar systems should be grounded to protect against lightning.
■ The system’s electrical connection for sensors and voltage supply should only be established by a
trained professional. The relevant specifications (VDE 0100, VDE 0185, VDE 0190 etc.) should
be observed as well as special local (construction) requirements. (Grey cable = tank, black cable
= collector)
trained professional. The relevant specifications (VDE 0100, VDE 0185, VDE 0190 etc.) should
be observed as well as special local (construction) requirements. (Grey cable = tank, black cable
= collector)
■ The solar pump station’s componentry varies depending on type and equipment.
■ The diagrams used are examples.
■ Subject to technical changes and further developments.
WARNING
WARNING
A properly sized expansion tank must be used to avoid damage to the solar thermal system.
WARNING
The expansion tank may be hot, ensure that scalding does not occur.
WARNING
Failure to heed these instructions, especially the safety instructions, can result in the destruction of and
defects on the expansion tank, endanger persons, and impair the operation.
defects on the expansion tank, endanger persons, and impair the operation.
WARNING
Thermal expansion tanks should be sized to account for 1.5 times the solar system circuit volume.
SL-PS Installation & Operation Manual